Supply clear acrylic profiles for LED lighting

Product Name: Acrylic profiles for LED lighting

Description of the material: A colorless, transparent, light transmittance is plastic the best, is higher than the glass, light transmission range is large; reflectivity varying with the incident angle, the absorption of light by the minimum rate, can make the total reflection. When the PMMA carrier (plate, rod) bending degree less than 48 degrees can light conduction; polymer is random vertical configuration, but the existence of isolated short-range ordered arrangement (tacticity), so the tensile orientation products have a crystalline structure, has good anti crazing, crazing resistance increase and the impact toughness; lightweight, tough, with higher mechanical strength at room temperature, and the influence of temperature on small, excellent surface gloss, high tinting strength, good dimensional stability, but the surface hardness and anti scratch property difference, impact strength is low; the electric performance is good, but decreases with the increase of frequency; water absorption, anti aging sex is good, non-toxic, no flame combustion.

Application: Decoration, furniture, lighting accessories, advertising etc.

About products:

FAQ:

1)Q: what are our main process?

A: "extrusion" refers to the plastic raw materials through processing extruder, through a process of die forming.

Advantages: high production efficiency, adjustable length, diameter and wall thickness of high control precision.

Disadvantages: a single production required number, a small amount of production will lead to great waste of raw material.

"Pouring process" refers to a process of cooling molding plastic raw material perfusion in the mold.

Advantages: good control - outer diameter (suitable for bigger diameter pipe), good processing performance, high heat resistance, single production quantity required less

Disadvantages: low production efficiency, not a variable length, wall thickness control accuracy is not high

2)Q: the existing product which can be processed?

A: we can carry on the tubes and rods: cutting (including cutting oblique mouth), polishing (flame, cloth wheel, diamond), punching, bending and other post processing, plastic.

3)Q: using new material and there is much difference between the feed back?

A: first of all, back material mixed with other substances, purity impure, and therefore makes the product transparency and surface smoothness is insufficient, influence the appearance and quality of products; secondly, the feed back after a number of processing, each processing needs to go through high temperature, making the material molecules produce cracking, greatly reduce the stability of the product, weather resistance and aging resistance performance. Such as: the incorporation of excessive feed back PC pipe than ordinary acrylic tube more easily ruptured.

About us:

our policy is to achieve the customer's satisfactory not only by the high quality of the products but also by our sincere service