Cotton Stalk Shredder

Specifications

Cotton stalk shredder(branches)available motor, diesel engine or 30-50 horsepower supporting as power. Chain conveyer and the floating roller conveyor into the material feeding roller pressing, to enter, upper and lower feeding roller material press again. The relative motion of the moving knife and the fixed knife cut material into ideal section is installed, and then through the wind leaf, pipeline material thrown.

Cotton stalk(branches) shredding machine widely used in cotton stalk, straw, branches, bark biomass cutting processing, after processing the finished products can be used for power generation, pulp and paper, wood-based panel, such as ethanol extraction. Cotton stalk shredder shell is made of plates, convenient operation, automatic loading, saving labor, high yield, high efficiency.

The basic operation

1. To give full play to the performance of the machine, the operator should not be less than 3.
2. Iron, stone and other debris mustn’t in the raw materials.
3. When it works, adjust the proper material feed rate, too much could easily lead overload or stall, too small will affect the voltage cut efficiency.
4. If the situation of blocking material, shouldn’t handle with hands, shut down the machine immediately.
5. Stop working, you should let the machine idling two minutes, blowing dust, weeds, and then shut down the net within.

The advantages

The quality is reliable, simple structure, easy operation, small size, small footprint, energy saving, ects.

The main technical parameters