Carbide ISO Turning Insert TCMT16T304-HF

Specifications

Carbide ISO Turning insert TCMT16T304-HF

1)Product Introduction:

XHC151:Substrate with excellent wear-resistance,in combination with MT-Ti(CN),thick layer AL₂ O₃, TiN coating.It is an ideal grade for the finishing steel,cast steel and stainless steel under gigh speed and dry machining.

XHC251:Cutting edge with special strength and toughness,in an optimal combination with MT-Ti(CN),thick layer AL₂ O_3,Tin coating.itis a suitable grades for a wide application.It is good for the finishing.Semi-finishing and Light roughing of steel,cast steel and stainless steel.

XHC351:Substrate with high strength and resistance against plastic deformation,in combination with MT-Ti(CN),thick layer AL₂ O₃,TiN coating.It is suitable for light roughing and roughing steel,cast steel and stainless steel.

XHM151:Substrate with special structure,in combination with Ti(CN),thin layer AL₂ O₃,TiN coating .Withthe resistance against diffusion wearness and plastic deformation,it is good for finishing and semi-finishing(turning as well as boring)of stainless steel.

XHM251:Substrate with good toughness and stength,in combination with Ti(CN),thin layer AL₂ O₃,Tin coating .It is a premium grade for semi-finishing to light roughing (turning and boring) of stainless steel at continuous and intermittent machining conditions.

XHM351: Ti(CN),thin layer AL₂ O₃,Tin coating with very good strength and impact resistance.It is suitable for roughing turning of stainless steels at low to moderate cutting speed or interrupted cutting,also for high cutting speed and heavy cutting in P30 area.

XHG102: in combination with PVD TiN,TiAIN coated carbide grade.Suitable for finish machining of cast iron.

XHG151:In combination with PVD TiN,TiAIN coated carbide grade.Suitable for semi-finish turning of cast iron.

XHG252:In combination with PVD TiN,TiAIN coated carbide grade.Suitable for rough machining of cast iron.

XHD252:In combination with PVD TiN,TiAIN coated carbide grade.Suitable for rough machining of hard cast iron,nodular cast iron.

2) Advantages:

duced with advanced German equipments and perfect workmanship

2.We are good at process.Every pieces would do it,not Batch processing

3. Long use lifetime and stable performance

4.Good quality with competitive price

Our German Equipments:

3)Other Main Products:

Aluminum turning inserts

Commonly used models:CCGX ,DCGX ,TCGX ,VCGX ,SCGX ,SEHT,APKT.

Turning inserts

Commonly used models:CNMG ,SNMG ,TNMG ,CCMT ,WCMX ,DNMG ,SNUN ,TNGA ,

TNUN ,WNMG ,DCMT ,RPMT

Cermet and Ceramics inserts

Commonly used models:

SEKN ,SPKN ,SPRN ,SEEN ,TNGG ,CNMG ,SNMG ,TNMG ,CCMT ,DNMG ,WNUN ,

WNMG

Milling inserts

Commonly used models:

SEKN ,SPKN ,RDKW ,RPMW ,TPCN ,TPKN ,TPAN ,APKT ,APKT

4) Company Brief Introduction: 

 Zhuzhou XinhuaCemented CarbideIndustryCo.,Ltd is a large manufacturer and exporterfor cemented carbide and cermet inserts(such as:milling inserts,turning inserts and Aluninum inserts and so on)in China.

Our factory set up more than twenty years,and there have a abundant of experience to manufacture the cemented carbide inserts.Our produces sell well in Suoth America,EU ,Asian and so on.

“What should I do?I haven’t found the insert type in your Ablibaba”.It doesn’t matter,we can according to your request to manufacture the inserts.

 Zhuzhou Xinhua Carbide Industrial Co.,Ltd.,aiming at international up-to –date level,has always focused on upgrading its technology and reinforcing its management.

 If you have anything unclear,pls send the inquiry to us,we will reply you with the first time.Thank you!