High Temperature Dry Heat Sterilization for Salon Tools& Hot Dry Sterilizer

Specifications

 High Temperature Dry Heat Sterilization for Salon Tools& Hot Dry Sterilizer

Using Method:

1. Put the YM-9010 sterilizer in a stable surface.
2. Open the lid, put the quartzite in to the pot; the amount of quartzite can not be too much(not beyond the inside capacity of 80%).
3. Connect the power,and turn on the switch ,the light turn red and the product begin to heat at the same time.    
4. After 10 -- 12 min heater,insert the tools need disinfection (such as:scissors, razors and son on )into quartz sand vertically.
5. After 20--30 seconds, put on the adiabatic gloves and take out the sterilized tools.
6.  When the inside tank reach the setting temperature,the light will be automatically extinguished and the sterilizer stop heating;
7. And the sterilizer will heater automatically when the temperature is lower, indicator light will turn red again.

 Factory Pictures and Certificate:

Product Pictures:

Similar Products:

We are an professional manufacture factory make all kinds of wax warmer.hair removal machine,sterilizer.and all kinds of beauty equipment.We have professionals andtechnical do the new product research and development,welcome OEM.

If you have any questions,pls feel free to contact me.