HOT!!! 1 cavity semi-auto PET bottle blow molding machine

HOT!!! 1 cavity semi-auto PET bottle blow molding machine

Bottle blowing machine

DY-1200A semiautomatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 100-2000ml. It is widely used to produce the carbonated bottle ,mineral water, carbonated drink bottle, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.

Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.

The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the     different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.

The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.

The machine can be operated in the step-by-step mode and the semi-auto mode.
The machine is small with low investment, easy and safe to operate.

The follow is the whole bottle blowing filling packing line of bottled pure water. 

1. Semiauto bottle blowing machine( 1 to 1) 

2.  Pure water treatment line ( 1T/H )

3. Bottle water washing machine+filling machine+capping machine (Pet bottle,screw cap)

4. Automatic sleeve labeling machine+label shrinking machine+steam generator (For PE,PP film)

5. Bottle dryer

6. Ink jet code printer

7. Semiauto film package machine

 ♣♣♣WELCOME TO OUR INDUSTRY♣♣♣

Company Introduction: