Aluminum Bronze UNS.C61000 rectangular bars

Specifications

Aluminum Bronze UNS.C61000 rectangular bars

C61000 Details & Applications:
C61000 Aluminum Bronze

CuAl8 – UNS.C61000 Aluminum Bronze Alloys, Nominally composed of 92% copper and 8% aluminum, which is known for its hardness, high strength, wear and corrosion resistance. Although it is an engineering alloy, its rich gold color also allows its use in decorative applications, and it has good hot and cold workability. So its applications including welding wire, bolts, tie rods, shafts, and pump parts.

Typical Application for C61000 Aluminum Bronze Alloys:

Architecture: Decorative Applications
Fasteners: Bolts, Nuts
Industrial: Tie Rods, Welding Wire, Shafts, Pump Parts, Overlay on Steel for Wearing Surface

Available Sizes:
Custom Diameter & Sizes, Random Mill lengths

Available Products (forms):
Round bars, Flat bars, Square bars, Rectangular bars, Hexagon bars
Custom shapes are available upon request.

Chemical Composition:

Al: 6.00-8.50%
Fe: 0.50% Max.
Si: 0.10% Max.
Zn: 0.20% Max.
Pb: 0.02% Max.
Cu: Balance
Note: Copper plus additions equal 99.50% minimum.

Typical Physical Properties:

Specific Gravity: 7.78 g/cm3
Coefficient of Thermal Expansion per °C: 17.80 x 10-6 (20-100°C)
Electrical Conductivity (% IACS): 15 % @ 68 F
Thermal Conductivity: 40.0 Btu • ft/(hr • ft2•oF)at 68F
Modulus of Elasticity in tension: 17000 ksi

Note: 
1). the units are based upon US Customary.
2). the typical physical properties apply to age hardened products.

International Specification:

Rods/Bars: UNS.C61000, CDA610, AWS A.5.7 / Federal QQ-C-450

European Standards: CuAl8, DIN 2.0920

Note: 
ASTM: American Society for Testing and Materials 
RWMA: Resistance Welder Manufacturers' Association 
Note: Unless otherwise specified, material will be produced to DIN & RWMA.