Pyrolysis Oil Waste Tyre Recycling Equipment Cap-5 to 20MT/D

Product descriptions of pyrolysis oil waste tyre recycling equipment

At present, the use of waste plastics, waste rubber oil and waste oil, waste oil, tires oil refining as a raw material processing, technologically advanced and feasible, less investment, raw materials and more effective faster, better prospects, the best choice is to invest and build factories in.

The production line of pyrolysis oil waste tyre recycling equipment

Waste tyre crushing system  →Constant temperature heating system →Continuous pyrolysis system →Carbon black production system →Gas purification system →Flue gas purification system →Control system →Oil distillation system →Oil 

Production line features of pyrolysis oil waste tyre recycling equipment
- The use of advanced low-temperature pyrolysis cracking patented process to achieve continuous production of industrial, environmental and safety risks to eliminate the fundamental.
- Patented heating technology and a unique heat dispersion technology combined with low sulfur heating transfer catalyst so that the material is heated evenly, oil and high yield, good quality oil and carbon black.
- Income after production line can purge gas as a fuel for all heating systems, and the use of waste heat recycling technology, high thermal efficiency and reduce operating costs.
- Low-temperature pyrolysis process so that safety performance and equipment life greatly improved.
- Special flue gas cleaning systems can remove all the contaminants: H2S, CO, CO2, SO2, SO3, NOX, NH3 and other organic compounds and solid particles, so that emission targets meet the requirements of European and American high-standard countries.
- The entire system using PLC programmable logic control system, the control point can automatically control a variety of functions of data acquisition, operation, record, print reports, alarm.

Main parts of pyrolysis oil waste tyre recycling equipment    

Auto feeder:

1. Made by Q245R boiler plate 

2. Auto-welding both inside and outside 

3. With rock wool insulation board.

Reactor:

1. 50 ton hydraulic pressure 

2. Can feed all types of materials 

3. Save labor and save time

Catalyst chamber:

1. improve oil yield and oil quality 

2. Reduce the speed of oil gas so that it can be better cooled

Oil-water separator:

1. Separate oil and water 

2. Collect heavy oil 

3. Water sealing design keep safety

Condenser:

1. The oil gas is cooled separately by small pipes inside condenser 

2. Light oil is collected here

Vacuum device: Keep machine running under normal pressure

Anti-back fire device:

1. Recycle residual gas to furnace as fuel 

2. Water sealing design prevent tempering

Dust removal device: Dispose of flue gas caused by using coal, wood, oil or natural gas.

Characteristics of pyrolysis oil waste tyre recycling equipment

1. High oil output rate 45% - 55% with special catalyst formula and high tech.
2. Rapid condensers and large cooling area, assure you get much more and higher quality oil. Diversiform cooling system (condensers or pipe pond) can be choose according to client's willingnes.
3. Dust-removing device -four levels dust processing system make sure no any population and the output smoking is the spray .more environmental protection. No-pollution.
4. Double tail-gas recycling and burning system, saving energy.
5. Q245R boiler plate, high temperature resistance, thickness reaches 16mm, guarantee
     4-7 years service lives. And optional plate is Q345R.

Adventages of pyrolysis oil waste tyre recycling equipment

1. the production cost is low, gas recovery completely, save coal.
2. seal production, little pollution, high safety coefficient.
3. spiral, production speed.
4. equipment simple, minimal damage, easy maintenance, durable.

The usage of the final products 

1.Fuel oil: oil from this plant can be used as industrial fuel for burning.
2.Crude carbon black: crude carbon black from this plant is crude, and it can be sold to the brick factory as internal combustion or to the factory needing it as raw materials, such as tyer, shoe, cable and sealant companies.
3.Steel wire: it can be sold to the iron and steel company directly.

After sales service  

1.Installation and training: our company will send one technician for each set of machine for guiding our installation, testing the machine and training your workers.The installation period shall be 15days. 
2.Warranty: The warranty period is 2 year.The problem caused by wrong operation of workers shall not be responsible by our company.

Contact information