Excellent High Purifying Rate Used Black Diesel Oil Processing Plant

Product Description of  Used black diesel oil processing plant 

♥. Used black diesel oil processing plant consists of  six main parts , which are distillate tank, energy recycling system(pre-heating tank), cooling tank and storage tank, wash oil tank,dedusting system. 

Direct heating and indirect heating methods are available to choose from for the distillate tank.

The energy recycling device on the top is the equipment is the main part of energy saver.  

♥. Used black diesel oil processing plant can be used in black engine oil,Crude oil and plastic oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with Waste oil which can be pretreated, through the coal (or fuel oil,gas) heating to working temperature,the maximum working temperature is about 410 degree and the required gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of waste oil in reactor is complete, stop heating, and remove residue from the tank of bottom, then this machine can be used again. 

Quarantee of  Used black diesel oil processing plant

Overall quality assurance two years (except wearing parts under normal operation, free maintenance), life long maintenance. Host the Q245R boiler steel plate, can bear high temperature 700 ℃.

Application and raw materials of  Used black diesel oil processing plant

Mani parts of  Used black diesel oil processing plant

♥. Reaction tank: waste oil will be pumped into this tank after pretreated.

♥. Heating system: through burning coal or fuel oil to make the oil temperature up to setting value. this system equipped with insulation system. 

♥. Catalytic system: waste oil reaches the predetermined temperature, via catalytic effect, then the gaseous hydrocarbons will become gasoline and diesel composition.

♥. Cooling system: gasoline and diesel after catalytic effect can be condensed into liquid materials.

♥. Temperature control system: ensure that waste oil transform into gasoline and diesel oil, waste oil drying by distillation, can stop   heating   timely.

♥. Exhaust gas handling system: a small amount of not liquefied gas via treated, can meet emission standards.

♥. Used black diesel oil processing plant is particularly suitable to regenerate used engine oil including diesel engine oil, gasoline engine oil,motor oil,ship engine oil, truck oil, and used hydraulic oil, other used machinery lubrication oil.

Used black diesel oil processing plant can remove water, impurity, acid base, and tiny impurity dispersed in oilsuch as carbon particles, heavy metal ions, deep oxides, as well as bad substance such as colloid and bitumen. Thus, the clarity of oil is recovered, engine oil quality improved, performance of engine restored, abrasion reduced, these would ensure correct operation of lubricant system of a engine and extend the life time of engine oil and engine as well.

Competetive Advantages of  Used black diesel oil processing plant 

♥. 100% Avoid burn technologyexplosion-proof technology for 100%

♥. With auto welding machine for tire oil machinery, it can not only greatly improve working efficiency but also guarantee the welding quality.

♥. Professional thermometer, pressure gauge and safey explosion-proof valve. 

♥. It is dangerous to burn exhaust gas (C1 to C4) without any safety measures. but we special design which is hydroseal and gas gun .It is not only guarantee the safety but also can save the fuel.  

♥. The third generation of heating method which combines the advantages from direct and indirect heating . It is safe for the operation. 

♥. Equipped with anti-explosion device, safety valves, energency valves, pressure and temperature meters, as well as the alarming system, which will ensuer 100% seurity. 

The technical parameter of  Used black diesel oil processing plant 

The technological process of  Used black diesel oil processing plant 

♥. pump crude oil into refining tank and heat with conduction oil, and the temperature will reach about 70°C-80°C after one hour.
Add acid or alkali to separate according to the acid value. After one hour's processing and 4-6hours deposit, then convey soap stock to storage tank.
♥. Pump refined oil into decoloring tank. When it is up to 90-110°C after one hour's heating, add clay into tank for 20min's processing. Then separate clay and oil with filter.

♥. Put discolored oil into deodorization tank with vacuum pump. Heat and process with steam for odor removal. After filtering, you will get final oil product.

Packing&Shipping of  Used black diesel oil processing plant 

We can offer standard exporting packing for long distance sea transportation, wooden case with steel frame, it not only can protect machi Small hydraulic interlocking brick machine ne from damage, but also can guarantee smoothly pass the exporting inspection.

Our thoughtful service of  Used black diesel oil processing plant 

Why us?

♥. How about the quality of machines?

Our machines adopt advanced technology. Moreover, we carry out strict supervision during production and make sure every finished product with high quality.

♥. About the delivery time?
Generally, it will be about 20-25 days days after your deposit, which also will be on basis of your order.

♥.What is the packing for machine?

It depends on your ordering quantity. For sample orders,  we advise iron case or plywood case packing to protect the machine from damaging during loading and shipping.  For full container load orders, nude packing is ok.

Welcome to visit our factory and test our machines.

Thank you!