Specifications

Hot sell and best quality scrap scrap copper and plastic recycling machine production line

 Product Description of hot sell and best quality scrap copper and plastic recycling machine production line

Scrap copper and plastic recycling machine is specialized in recycling scrap copper wires or cables,which diameter should be below 25mm,such as Auto Electric Wire,Motorcycle Electric Wire,Computer Wire and other various miscellaneous material cables,communication cables etc.The recycling rate can reach 99.9%.

This machine is consist of Crusher, Dust Cleaner, Crushed Material Conveyor, Separator, Pressure-reducing Blower, Dust Collector, Output Unit, and the Underbed.

The scrap copper and plastic recycling machine uses the cutting machine ---crusher ----conveyor---virbrate screen --the seond pulverizer ---conveyor ---high voltage electrostatic separator to separate the copper from the plastic .during manufacturing there is no dust spilt ,no drags ,no poisious air,and no water pollution.

Application of hot sell and best quality scrap copper and plastic recycling machine production line

Scrap copper and plastic recycling machine,cable wire crusher,waste copper wire separator apply to all kinds of automotive circuit lines, communication cable lines and various waste wires that are not suitable to be  processed by stripping machines. Such as: computer wires, automobile wires, tele-commmunication cables, etc.

Working process of hot sell and best quality scrap copper and plastic recycling machine production line

1.Feed the scrap wires and cables into the machine,they will be grinded into small granules.(Looks like grains of rice).During this process, copper and plastic are separated but mixed together.

2.Then through the wind separation and vibrating separation device, the copper granules will be separated from the plastic.

3.After separation,the pure plastic and pure copper granules will be discharged from different outlets.

Features and Advantages of hot sell and best quality scrap copper and plastic recycling machine production line

1.Suiting wide range of Wire/cable:Computer wire,Automobile/car wire,Telephonewie,Communication wire&cable etc.  
2.We put the waste wire/cable directly in the machine! No matter twisted or tangled together!(The diameter should between 0.5-20mm)
3.Energy saving: It consumes less energy compared with the same products! 

4. Change the waste wire into copper, low cost, high profit.

5. Eco-friendly. The whole process adopts mechanical power without water or gas, no dust, no pollution.
6. Incredible recycling rate. The test show the recycling rate is up to 99.9%, which is a guarantee of high quality and good market of copper granule processed by our machines.
7. Labor-saving. On account of its integrated design and intelligent design, it just needs 1~2 workers to operate, greatly saving your labor cost.

Working principle of hot sell and best quality scrap copper and plastic recycling machine production line

1.When the raw material goes into the crusher,it will be cryshed into powder.Then they will be transported to the grading sieve by the conveyor. Under the affect of vibration screen , the crushed wire powder and copper powder will flow into different parts , in order to achieve the copper and wire ' s separation.

2.And during the production, the main point is that our machines equip with the second-crushing part, that means if the powder is much larger, it will be returned and crushed again, so that it can improve the separating rate,which can be reached to 99.9%.

3.Meanwhile, our machine equips with dust collector, it can absorb the dust, fine dust, bug dust, etc, which can make sure the working site clean and also good for the workers' heanth.