Lighting Box Advertising 10W SL-BL005-100 650-750Lm CREE LED Chip for Light Box From SLT - Paul

Specifications

Lighting box advertising SL-BL005-100, 10W, 700-800LM, CREE LED chip:

x 1, Power/voltage: 10W/DC24V

2, Luminous Flux: 700-800Lm

3, Size: 360*23*16mm

4, LED number: 5pcs.

5, Beam angle: 9*50°/15*60°

About the LED module.

1, The LED module should install in the sides of the light box,

2, If the width of the light box is samll than 1.2m, you can just insatll the LED module in 2 sides, if the width is bigger than 1.2m, you should install the LED module all sizes.

3, The biggest size of the light box is 3m*3m, if the light box is bigger is more than that size, it will has dark area in

the middle of the light box.

4, The LED module should use in the light box which it's depth should at least be 7cm for one side light box, if it is

two sides light box, the depth should be at least 12cm.

5, The LED module should install on the aluminum for heat sink, if you are not, it will harm the life span of the LED module serious.

6, For the CREE LED chip it has two beam angles, 9*50° and15*60°. I think most of you don't know the different between them, like the picture show below:

The advantage of the LED module compares with the fluorescent tube.

Light effect of the LED module.

Our factory:

The machine to manufacture the LED module:

Our service:

1, Your any question will be replied by Paul in 2 hours.

2, Your any requirement we will talk with our engineer then give you the answer in 6 hours.

3, If the product have any problem when you got and use our product( not cause caused by artificial problem), you can send the product to us and then we will fix for you. If the sample can't fixed well, we will send a new one next time you place the order.

4, It doesn't matter what the quantity you rder, we all will offer the best service to you.

5, The warranty of the LED module will be 2 years.

If your quantity is more that 10,000pcs, we will offer you 3 years warranty