Highly efficient analysing monitoring system for abrasion test machine

•This product, by monitoring the power of the motor of a machine tool (such as machining center and lathe etc.) diagnosis, discovered the wear and lack of cutlery, and notifies the time to replace it.

•In addition, by using the vibration sensor and the like, it can be used to determine the optimal processing conditions, such as feed and rotation speed.

•Other, monitor the status of various types of equipment by collecting the data of temperature, load, stress etc.

Purpose of use

Retionalization•efficiency

Visible of the wear of cutting tool

Enabled the exchange by life instead of periodic exchange, it reduces the wear of cutting-tool and its exchanging man-hour.

Chipping of tool is visible

Enable to prevent the outflow of defect, then reduced the defect rate and quality expense.

Visible of the optimum machining condition

By making possible to maximize the machining hour of tool, it reduces the consumption of cutting tool.

Visible of the trouble of equipment

Enable to prevent vital trouble and expand the life of equipment.

•Constantly monitors the cutting electric 
power of the drill 

•Drill of wear, breakage detection

•Abnormality detection, such as equipment  and coolant etc. 

•Setting of optimum cutting conditions

Set the optimum cutting conditions to measure the feed, rotation speed, vibration, etc.

•State monitoring of the heat treatment furnace

•Avail for analysis of failure, recording temperature data of the heating, temperature rising and temperature data of the cooling booth.

•Corresponding to the data traceability