High Production CTO Active Carbon Block Filter Cartridge Machine

Specifications

2.Low electric power.
3.High capacity
4.Approve CE&ISO

CTO Carbon Block machine components

Parameters

Production line could work 24 hours without a break.

Rated Power:16.45KW/set

Running power: 8kwh per hour when machine is running.

Inner diameter of carbon block: 40mm (Default)

Outer diameter of carbon block : 63mm (Default)

Length of carbon block:  5’’, 10’’, 20’’…

Inner diameter of CTO filter that we can supply:  9mm~80mm

Outer diameter of CTO filter that we can supply:  29mm~120mm

Raw Material:  Active carbon (granule) and LDPE Binder(Powder) Percentage of carbon is 88%~90% active carbon , Percentage of PE is 10%~12%.

Production capacity: 1pc per minute

Note: One Extruder just makes one kind of inner diameter and outer diameter. If you want to do different diameter(≤75mm), you should replace some parts of extruder(Mold, screw rod and barrel). If diameter is larger than 75mm, We suggest you buy a big extruder with bigger gear box and bigger motor…

Sensors: 3sets

Solid-state relay: 2 pcs

Temperature controller: 2 pcs

Button:2 pcs for every kind

Heating loop inside of extruder:3pcs

2 years warranty,

We provide the new main parts (inverter , screw rod ,extruder barrel , extruders’ motor ,gear box) for free if yours is broken without human factor during 2 years. After warranty, We will supply spare parts by cost price.

1. 7pcs of plywood case.

2. Total 12CBM after packing.

3. Wet gross is 1900kgs. Gross weight is 2100kgs

Name:Kevin