LED Stage Light/Color Changing Floods

Wireless LED PAR Can Light/LED Stage Light

Physical parameters

Lighting Specs:

   Working Voltage: 100-240VAC 50-60Hz

   DMX Channels: 3 or 5 Channels

   Control mode: DMX512, Master/Slave, Auto Run, Sound Active

   Dimensions: 24cm X 22cm X11cm    

   Applications: Movable Stage, Shows, Clubs, Shops and Outdoor projects.

Wireless DMX Specs:

   Tricolor LED displaying

   126 channels automatical jumping frequency, high anti-jamming ability to ensure working reliability.

7 groups ID code settable, User can use 7 groups individual wireless net without any interfere each other in

the same place.

   Communication distance: 700M

   Work frequency section: 2.4GHz ISM band,126 channels frequency section.

   Max transmitting power rate: 20dBm

Receiver sensitive: -94dBm

Battery Specs:

Cell QTY: CJ18650/2200MAh X 27PCS

Cell Composition: 9 in parallel 3 in series

Rated Voltage: 11.1V

Discharge Voltage Range: 8.25-12.6V

Rated Capacity: 19.8Ah

Charge Voltage: 12.6V

Charge Methods: Constant Voltage/Constant Current

Standard Charge Time: 8 Hours

Discharge Cut-off Voltage: 2.75V/Cell

Overcharge Protection Voltage: 4.25V/Cell

Circulation Life: Not less than 300 times

l         The battery should not explode, fire, smoke or leak after vibration, crash, free fall, overcharge, overdischarge, shortcircuit or hit by heavy objects, while deformation is allowed.

Function Descriptions:

l         Tricolor dimming: 255 grade brightness tunning, sound activation

l         Tricolor Jumping change: Red, Green and Blue color jumping in turns, 255 grade speed control, sound activation

l         7 color jumping change: 255 grade speed control, sound activation

l         Multicolor graduating change: 255 grade speed control, sound activation

l         Multicolor strobe: 7 colors strobe in turns, 255 grade speed control, sound activation.

l         Auto Run, Built-in programme circulation

l         Master/Slave: Multiple units linked, slave changes with master synchronizingly.

l         DMX dimming: Different units are assigned their own DMX address, their outputs are changing with the data of the DMX controller.

Operation Panel

1-LCD Display 2-Operation Button 3-Wireless DMX Indicator 4-Sound Activation Indicator 5-DMX Signal Indicator 6-MIC

7-DMX Socket 8-Antenna 9-Battery Charging Indicator 10-Power Out 11-Power In

Button Description

MODE:Working Mode Switch

SETUP:LCD Cursor Moving Key, Flashing Position is the parameter to be revised

UP:Data Up

DOWN:Data Down

Function Setup

l         Built-in Function Setup

Press SETUP key to switch among all sub-function key, speed, sound button, etc. Cursor flashing position is the parameter to be revised. Press UP or DOWN to adjust the data. It can be master unit.

For example: LCD displays"4.FADE S010 A:N"

4.FADE: NO.4 function, Fade

S010: Speed value 10

A:N: Sound Activation closed

l         AUTO RUN

Auto Run the combination function of all sub-functions, it can be the master unit, set the Sound

Activation parameter to be "N" to close the Sound Activation Mode of the sub-function.

l         DMX Address Setup:

Address Range: 1-512, Press UP to setup address upward and DOWN to setup address downward. There are two DMX channels for your choices: DMX 3CH & DMX 5CH

DMX 3CH Mode

                      CH1:0-255 Red Dimming Range

                      CH2:0-255 Green Dimming Range

                      CH3:0-255 Blue Dimming Range

DMX 5CH Mode:

                      CH1:0-255 Red Dimming Range

                      CH2:0-255 Green Dimming Range

                      CH3:0-255 Blue Dimming Range

                      CH4:R, G, B, W General Dimming

CH5:Strobe Speed

l         Slave Mode

Choose Slave Mode, Synchronizing with Master unit.

l         Wireless ID Setup

Press SETUP, UP OR DOWN at present mode to display current ID, press again to setup new ID, ID value will be added 1 more by pressing one time, ID indicator color will change according one by one.

Working Status:

l         LED constant light: Showing current ID, no DMX or wireless signal

l         RED LED flash: Transmitting

l         Green LED flash: Receiving

ID code and LED color corresponding relationship:

l         1:RED

l         2:GREEN

l         3:RED+GREED---------------Yellow

l         4:BLUE

l         5:RED+BLUE------------------Purple

l         6:GREEN+BLUE--------------Cyan

l         7:RED+GREED+BLUE------White

l         Battery Power Left Indicator

If there is no operation for 15 seconds for all Keys, it will automatically showing battery power status. Current value is the percentage of the total full power.

Description for LED Indicators:

RF-ID: Tricolor LED to indicate working status and ID code.

SOUND: Sound Indicator, flash when signal is strong enough, no relationship with setup.

DMX: DMX signal indicator, flash when there is DMX signal or connected with master unit.

CHARGING LED: Battery charging indicator, Red is charging, Green is full.

User instruction and safety regulation:

Recommended to use:

Read the user manual and labels on the lighting carefully before use.

Please use the unit where there is no rain.

When using, keep away of hot source, high pressure, avoid kids, never throw or hit the unit.

Use the supplied power adapter only, never charging over 24 hours.

Never dismount the light or battery by yourself, not to place the unit in a wet environment to avoid danger.

When not using the unit for long term, please save the unit properly in a dry place, battery should be half charged.

Please bury the used unit, never throw to fire or water.

Pictures: