Universal charger use for 18650 CR123A 3V 16340 14600 26650 rechargeable battery

Universal charger use for 18650 CR123A 3V 16340 14600 26650 rechargeable battery

                                   Skype:SZUNIS1

Technical parameters:
Input: 100-240 - v AC 50/60 hz DC 12 v
Output: 4.2 V DC 500 ma x2,  3.6 V DC 500 ma x2,  1.48 V DC 500 ma x2
Working temperature: 0-35'C

Charge calculation methor:
Charging time = rechargeable battery capacity (mAh) * 1.5 (charging ratio)/charging current (mAh)


Product features:
* With DC 12V Car input
* microcomputer control technology, intelligent implementation independence, support the mixed charging mode
* can be of any capacity of ni-mh/ni-cd/ni-mh/ni-cd/lithium or lithium iron phosphate batteries in any combination
* can fit into a below 26 mm diameter, height of 34-70 - mm cylindrical rechargeable battery
* the battery reverse connect protection, short circuit protection, zero voltage protection alarm function


Method of use
1. The battery in the charger indicator (+) (-) the right way in the charger, the charger to work
2. The battery into, then do not install batteries, power supply is connected, after self-checking by three yellow LED lights flash once each other out, will follow the battery charging LED flashing, after charging full, all three LED lights on

Note:
1. Please do not short circuit.Remove or at high temperature.In order to avoid dangerous
2. Please do not to bad battery and rechargeable battery recharged
3. There will be slight warming in the process of charging is a normal phenomenon
4. The charger is working, if the environment temperature is too high, please put the charger in a well-ventilated place
5. The charger not in high temperature (fire) and humid environment (such as the bathroom)
6. If you need put aside for a long time, please put in a cool and dry place