combines door control switch

Specifications

1. Door Server Introduction

Door Server MP03 is a two-in-one switch that combines room number display and doorbell. The product integrates room number display, do not disturb indication, clean up indication and PIR touch-screen doorbell functions. This switch can be equipped with mechanical doorbells and electronics doorbells. The features of the switch include: easy to use, beautiful style, safe and smart. The product is suitable for hotel, inn and so on, can be used as indication and controlling the doorbell in the room.

1. Safety Precautions:

1)       Installation must be in accordance with national norms and install by professional and technical personnel.

2)       Before installation, users must disconnect the power. Live operation is forbiddance.

3)       Input voltage AC220V 50Hz

4)       4. The voltage of “do not disturb” is AC220V 50Hz

5)       The voltage of “clean the room” is AC220V 50Hz

6)       When configure the mechnical doorbell, one wiring of the doorbell must connect to the firewire.

7)       When configure the electric doorbell, all to wiringsl must separately connect to the two controlling wire.

8)       When break down, please contact the manufactures, do not overhaul by yourself.

1. Installation Steps:

1)       Use the screwdrive to screw off the fastened metal plate.

2)       Fasten the metal plate on bottom case.

3)       Install the door server wiring correctly.

4)       Fasten the door sever on fastened metal plate.

5)       Tighten the screw from the side bar.

1. Room No Setting:

Customers provide room no. The Room No. will be set before shipping.

1. Wiring Diagram: