Bottle warmer tunnel

Specifications

The bottle warmer is used to warm PET bottles, cans after cold carbonated filling. 

The purpose is to prevent water condensing on the cold bottles and make a good condition for labeling.

Main Features

1)      The machine is divided into running chains, frame, and pipeline for water circulation, steam pipeline and electric control.

2)      Working principle

3)      The inverter puts needle reducer and drives initiative square axles rotate through roller chain. The sprocket on the square axle drives the chain board of plastic to be moved, form the board organization of the chain. The in-feed bottle comes into the hot water area, and is arranged orderly, warming the bottle by hot water heated by steam.

4)      Section I is the rising temperature by hot water, the temperature controlling precision is ±2°C. When the water comes to regulated level, the water flows out of overfall. Section II is the permanent temperature of hot water. The hot water feeds into the launching trough, while the level of troughs is lower than the liquid level, the water circulation is supplied water supply. When the water comes to regulated level, the water flows out of the overfall.

5)      Section III is the spraying device of pure water, in order to keep the anhydrous mark of appearance after the cooled bottle dry.

6)      Under the automatic condition , all of pumps run automatically ,protected by low liquid level .low liquid level can postpone a certain second(it is can designed in local).

7)      No matter what it is manually or automatically controlling, the steam metering needle would work, under the condition of Trough No.1 and No.2 start-up; it shuts off up to the designed temperature ,and the steam metering needle turns off ;it turns on ,while it is lower than the designed temperature.