China supplier plastic calcium carbonate caco3 filler masterbatch for pp / pe

 Our PE PP calcium carbonate / Caco3 calcium carbonate filler masterbatch is a highly filled calcium carbonate masterbatch on a HDPE /LDPE / LLDPE / PP compatible carrier (according to customer's demand).

Caco3 filler masterbatch pellet made by extrusion mothod , is a product of coplex chemical composition , formed by a mix of natural and chemical components . It is a blend of fine mesh calcium carbonate and polyethylene resin .This masterbatch is intended for filling and modification of polyethylene products .

Our Caco3 plastic filler masterbatch specification detail :

Advatage of caco3 filler masterbatch

1. Cost benefits: Considerable Cost reduction

2. Production Increase: Increases production more than 10% compared to any other filler in the market.

3. Quality benefits: Produced on advanced manufacturing equipments under stringent quality control ensuring consistency in every lot. Powder formation is much lower compared to conventional filler master-batches. It is one of the best grades of filler master-batches for HDPE/LDPE Carry Bags.

4.Support and Service: our company will offer fast and prompt delivery with excellent technical support

Cusomter's Benefit : 

1. Your profit will be increased because you sell the product with same price but your production cost becomes cheaper. Your price will be more competitive if you reduce selling price with same profit as earlier .

2. You don’t have to change the mesh frequently .

3. The waste share decreases so your expenses reduce. /  The performance of the product improves; it will be much better but at the same time cheaper than the one of your competitors.  / You will be able to make different high grade products by moulding.

4. Quality of your products will be improved but at the cheaper cost

 Caco3 filler masterbatch properties :

1.CaCo3 MB costs much cheaper than PP resin. With 20-40 mixer percentage to resin will decrease the prime cost of raw material, hence reduce production cost.

2.No friction on the worm of blowing machine therefore the pressure on net is very low .

3.In moulding the using of Caco3 masterbatch decreases the shrinkage and increases the rigidity of complete products.

4.In blow molding , the using of Caco3 filler masterbatch will provide high tensile strength and consistent elongation.

Application of Caco3 filler masterbatch :

YingXing Plastic Raw Plastic Co.,Ltd is sepcialized in masterbatch for nearly 12 years , our company manufactrures various kinds of masterbatch , widely used in film blowing , blow molding , injection molding , sheet extrusion , etc .

Application : Film Blowing  ,  Resin : PE PP

Application : Blow Molding  ,  Resin : PE PP PET PC PS 

Application : Injection Molding  ,  Resin : PE PP PET ABS and Engineering Plastic , etc

Application : Sheet Extrusion  ,  Resin : PE PP PET ABS and Engineering Plastic , etc 

1. OEM / ODM Service

Our professional R&D Dept can develop different product to different target and different requirement .

2. Free sample service

Samples can be free ( Normal 0.5kg to 1kg ). OEM sample will be prepared within 3 working days .

1. How i can get the price ?

Pls supply us the following information : what kinds of resin basis you need ? what color you want ( Panton or Raul No ) ? what application you will use ( film blowing , blowing molding , injection or extrusion ) or you can tell us what is you product .

2. How i can get the free masterbatch sample ?

According to your requirement , we will recommend our masterbatch sample to you . For sending the right formula masterbatch for you , we hope you can supply us your plastic product , so that we can get the righ formula according to your prodct .

3. How many days the masterbatch sample will be prepared well ?

3 days will be OK .

4. How many kilogram free sample will be supply ?

Nomally 0.5 - 1 kg , but we will prepare the samples according to customer's requirement . About the freight , we hope our customers' can afford this fee .

5. What's the payment term ?

TT , LC  will be accepted .

Normally payment term : 30% deposit  and  70% before shippment . 

6. What is the shippment day ?

Normally 7 working days , after we receive the 30% deposit .

7.  What kinds of resin you use to your masterbatch ?

Our factory is using virgin resin to the masterbatch . If your precious products are using recycled plastics, we can add whiten agent or special fragrance agent in the Masterbatch to make it more white and get rid of bad smell .

8 . Why you should try Masterbatch instead of Pigment Powder ?

 1) More clean Manufacture environment, no need to mix the pigment with other components and clean up 

2) Greater flexibility performance and impact strength by using Masterbatch, but using Pigment Powder is more fragile 

3) More easy to shape your end products facial feature or properity