Plastic Masterbatch for Shampoo Bottle Pipe Box

C. Other advantages using black masterbatches are increased fixation, increased quality of weld and seal affixed. There are marks of black masterbatches in which improve the efficiency of micronized hydrophobic chalk.

Film Blowing & Bottle Blowing Grade

• LDPE/LLDPE grade available as well.

Film Casting Grade

Extruded Sheet Grade

Injection Mould Grade

Plastic Carrier           

PP

Color

Blue

Pigment Content

20 ~ 65 %

Application

Film blowing , injection , extrusion

MFI ( g/10mins)

25 - 90

Moisture

less than 0.1%

Resistance Temperature

230 ℃ 

Melting Point

165℃ 

Safety Level

Environmental & fine

Certificate

ROHS SGS ISO9001-2008

Light Fastness ( Level )

4 – 5

A. Used to manufacture products from recycled polymeric materials. It absorbs moisture out of the plastic material. Concentrate gives an opportunity make dry materials even when moisture is inside the pellets (in this case, the raw material cannot be dried in the usual way).

B. Purpose - optimization of polymer extrusion process: reduces or eliminates product defects (especially in film producing process – reduce extruder torque moment), allows to recycle especially viscous polymers, which recycling is impossible with existing equipment.

C. Used to produce films with containing of HDPE, LDPE polymers, PP pipe extrusion, production equipment; to avoid sediments; also in PP extrusion (tissue or polyolefin cable) to reduce sediments and improve the product surface quality.

Retardants Masterbatch

A. Most polymers are flammable. In purpose to respond the fire safety rules, the polymer includes flame retardants to slow the spread of fire and fits the fire resistance requirements. Polymer manufacturers also use flame retardants in their production process.

B. Usage of retardants helps to solve many production problems: - manufacturing bulky products without deformation; - manufacturing products of different thicknesses and the hardness edge;

A. Provides antistatic properties, eliminates static electricity, common to all polymers. During processing and exploitation of polymer products these additives appear on the surface and accumulate electric charge.

B. Various antistatic surface-active substances are blending into polymer products they reduce the surface resistance. Structure of these materials has duplicate contacts.

C. Antistatic input does not exceed 2%. Antistatic properties are divided into internal (the antistatic is introduced into polymer with other additives) and external (antistatic lubricates to surface of the product).

A. It is used to prevent blocking of plastic film rolls. Recommended use if not only good slip properties (low coefficient of friction) are required, but increased adhesion strength of polyethylene film roll as well.

B. Recommended use then recycling temperature is up to 230 degrees. Input rate: 0.5% - 2% depending on the desired effect.

A. Especially apply to Polypropylene Resin, can improve the Transparency of Resin and Mechanical Properties. The masterbatch is used as injection molding, blow molding and extrusion forming of diaphragm material.

B. Perfectly apply to Household Appliances, LED Lights as to Anti-reflection.

C. High Efficient, just add 3%~4%.