Good quality Corrugated Paper Making Machine

Chapter One:Technical Parameter

1. Output paper: kraft paper,corrugated medium paper,carton paper

2. Output weight: 100-250g/m2

3. Net paper width: 2400mm

4. Design speed: 150m/min

5. Working speed: 80-120m/min

6. Capacity: 25-30T/D

7. The gauge: 3200mm

8. Pressure type: pneumatic pressure device

9. Driving type: use AC frequency conversion,and driving by step

10. Machine design: squaring box type, including left and right hand machine, high speed running

in safe and safety environment.

11. Layout type: Headbox——fourdrinier wire part ——2 main pressing part ——1Φ2500mm

dryer——1Φ2500mm dryer—— 3 Φ1500mm dryers——sizing machine—— 6 Φ1500mm dryers

——paper winding machine ( right hand machine)

Chapter Two: Technical design and requirement for the

water,electricity, air and vapor

1.Technical design: Pulping, paper making and processing equipment adopt one-stop process

design. This advanced design occupies small space for convenient operation and management.

It has high security and automatization degree, and can provide you high production with steady

quality.

2.requirement for the water,electricity, air and vapor

Requirement for the electrical source:

High voltage: AC10000V±10%

Low voltage: AC380V 220V±10%

Frequency: 50HZ±1%

Operated with compressed air:

Dielectric pressure: (aire supply)0.6-0.7Mpa

The highest temerature: 35°C

Quality: need filtrating

Working air pressure: above 0.6Mpa

3. Compressed air for the meter:

Dielectric pressure: 0.5-0.6Mpa

The highest temerature: 35°C

Quality: filtrated, unoiled and arefaction

Working air pressure: above 0.5Mpa

4. Branch water and primary water: clear and colorless water without sand, neutral PH scale.

5. Vapor:

working pressure: 0.3-0.4Mpa

Testing pressure: 0.8Mpa

Chapter Three: the main equipment structure

1. Fourdrinier part: The length of fourdrinier part is 18m, vacuum couch roll Φ650mm×2300mm

open style headbox, inner is bordered with stainless steel, drave by two homogenate roll,

macromolecule water board,macromolecule anti-grinding faceplate, suction box 8 pieces. Roll:

none slot roll with rubber covered. Frame:square frame is made of steel.

2. The press part: the main press 2, double, Φ 650mm×2850mm 4 stone rolls, Φ600mm×

2850mm 4 rubber rolls; shore hardness 95°±2, and pneumatic compression device(standard

height and moderate rubber roll)

3. The dryer part: Φ  2500mm×2850mm 2 dryer cans,Φ 1500mm×2850mm 9 dryer cans.

arrangment pattern (1+1+3+sizing machine+6), and pneumatic compression device. equipped

with pneumatic guide and electric mesh-fastener.

4. winding part: 2400mm cylinder winding paper machine and 2400mm rewinding machine.

5. Driving and controlling part: using of AC frequency conversion, and driving by step.

Flow chart 

Main machines

The frame

Workshop and customer

packaging

What we can provide:

1.787,1092,1575,1760,1880,2400,2640,2800,3200mm paper machine

2.paper egg tray machine

3.pulp making equipments

4.paper making equipments 

5.paper processing equipments

6.all kinds of spare parts

Best Service:

1.We will provide you all technical consultation and make the drawing and proposal for you.

2.We will send technicians to install and test the machine for you.

3.We will train skilled workers for you.

4.We will supply best pre-sale, after-sales service for you. 

Henan Province Qinyang Shunfu Paper Making Machinery Co; Ltd. was founded in 1988. We are 

specialized in the production paper making machinery, pulping equipment, paper egg tray making 

machine and paper processing equipment. Our products had been certificated by ISO9001 and 

exported to many countries, such as Uzbekistan, Russia, Kyrgyzstan, Nigeria, Ukraine, Botswana,

Libya, Algeria, El Salvador, Lebanon, Moldova, Bolivia.

More detail information and scheme, please feel free to contact with me!