Production of electromagnetic pump 2016

            Barrel type electromagnetic pump is established on the principle of linear motor, the structure of it is specific. The coil winding pass to different phase of the change of electric current, when two phase inversion, the magnetic field will move to the opposite direction, by adjusting the intensity of magnetic field to control the fluid velocity. The coil structure mainly is three-phase multi-layer coil structure and single solenoid structure. The cascading around more makes high power efficiency. Winding adopts forced water cooling way, including with insulating ring stainless steel water flange, stay and good insulation, this structure shall ensure that the axial pressure. Electromagnetic pump winding has six circuits, through the two main water system provide pump body in and out of the water. The inlet pipe has six nodes, the outlet pipe has six nodes. Each loop has cooling protection, when the temperature reaches 75 °C, each of the water loop by the movements of the overheat switch for overheating protection, after the cooling water temperature lower half will automatically restored.

       The economic benefit of electromagnetic pump application

          - Aluminum waste preheating, dry and melting fire will be directly under the burning of violent, metal burning less 2%-15%;

         - The waste of aluminum powder recovery goals up to 97% -98%;

         - By original aluminum smelting of batch operations for the continuous operation and improve labor productivity 30%-35%;

         - In the whole smelting process, melt through the aluminum electromagnetic pump water cycle, and melt temperature and chemical components uniform;

         - As a result of the shaft furnace charging, with the ordinary open the door of the feeding of furnace type lost little compared temperature, gas leak less, energy saving effect;

        - Can without open the door in the case through the vertical shaft furnace to join metal magnesium, silicon metal, manganese metal alloy ingredients to allocate the alloy component;

       - Due to the aluminum waste is in a closed system to join, no smoke overflowing in workshop, the working environment is very good;

       - Improve productivity, reduce labor intensity;

       - Shortening the cycle time fuses 10%, reduce energy consumption.

          Electromagnetic pump’s superiority

          Through the high production efficiency to improve productivity

          Improve the utilization rate of the stove

          Simple operation and reduce labor intensity

          Reduce the formation of oxide residue

          Improve alloy chemical composition homogeneous and solution temperature uniformity

          Improve the quality of the alloy

          Improve the recovery of metal

          Extending the refractory material and extend the service life of furnace

          To light scrap metal recycling has its own superiority