Various types of special medium transmission electromagnetic pump

              Electromagnetic pump is the use of magnetic field and in the conductive fluid interaction, make the fluid by the electromagnetic force and pressure gradient, and a device to push the fluid motion.

           Electromagnetic pump operating characteristics

            ♦ No physical components connection

            ♦  No contact with melting liquid

            ♦  No moving parts

            ♦  Extremely reliable sealing

            ♦  Can work continuously

           ♦  The velocity is easy to control

           ♦  Easy operation

           ♦  Structure is convenient for installation

           ♦  Low power consumption

           ♦ Realizes remote operation

          Electromagnetic pump’s superiority

          ♦ Through the high production efficiency to improve productivity

          ♦ Improve the utilization rate of the stove

          ♦ Simple operation and reduce labor intensity

          ♦ Reduce the formation of oxide residue

          ♦ Improve alloy chemical composition homogeneous and solution temperature uniformity

         ♦ Improve the quality of the alloy

         ♦ Improve the recovery of metal

         ♦ Extending the refractory material and extend the service life of furnace

         ♦ To light scrap metal recycling has its own superiority

              Barrel type electromagnetic pump is established on the principle of linear motor, the structure of it is specific. The coil winding pass to different phase of the change of electric current, when two phase inversion, the magnetic field will move to the opposite direction, by adjusting the intensity of magnetic field to control the fluid velocity. The coil structure mainly is three-phase multi-layer coil structure and single solenoid structure. The cascading around more makes high power efficiency. Winding adopts forced water cooling way, including with insulating ring stainless steel water flange, stay and good insulation, this structure shall ensure that the axial pressure. Electromagnetic pump winding has six circuits, through the two main water system provide pump body in and out of the water. The inlet pipe has six nodes, the outlet pipe has six nodes. Each loop has cooling protection, when the temperature reaches 75 ℃, each of the water loop by the movements of the overheat switch for overheating protection, after the cooling water temperature lower half will automatically restored.

         Electromagnetic pump’s application area

        ♦  Aluminium scrap recycling

        ♦  Quantitative casting

        ♦  Mixing

        ♦  The application of metal purification pickling process

        ♦  High temperature metal transfer

        ♦  Transmission of heavy meta