Hot Work Die Steel Plate JIS SKT4 of Forged Die Steel Material

Hot Work Die Steel Plate JIS SKT4 of Forged Die Steel Material

  5CrNiMo/ T61206/ 1.2714/ SKT4/ 55NiCrMoV6 Hot Work Mould Steel

1.        Applications:

Forging dies of all types, hammer forging dies up to largest dimensions, tools for tube and rod extrusion such as rams, bolsters, mandrels, plungers, sleeves, die holders, backing plates, chipping beds, press dies for mould parts, deep engraving dies, containers for die casting presses, hot forming dies, bending and heavy embossing tools, hot mill rolls, hammers and pile drivers, hot punching tools, very hard cold work dies and punches, hot shear blades, blocks for dies, forging

saddles, pressing spindles, shrink rings, armoured trim dies, hydro forming tools, plastic moulds, hot gripper and heading dies.

2.        Chemical analysis:

3.        Mechanical Properties:

Cr-Ni-Mo alloyed hot work tool steel with high temperature impact toughness and thermal fatigue strength, resistant to repeated shocks, high resistant to tempering, medium wear resistance, oil and air hardening with good through harden-ability, low P and S content, polishable. Suitable for pitting and chrome plating. This grade is produced on request annealed or quenched and tempered condition.

4.        Compared grades, based on usage:

5.        Condition of delivery:

1.      Soft annealed to max 248 HB

2.      Quenched and tempered, 1100-1350MPa.

7.         Physical properties:

A: We are the Manufacturer in Wuxi, Jiangsu province, China

Q2:Do you have Stainless Steel coils?

A: YES, our products including Stainless Steel Coils / Strips, Stainless Steel Sheets / Plates, Stainless Steel Bars, Stainless Steel Wire,Die Steel, Etc.

Q3: How can I get the samples?

A: If requested ,samples will be free.All the freight cost will be paid by buyer before place order. 

Q4: How much the transportation freight will be for the samples?

A: The freight depends on the weight and packing size and your address, detailed freight cost will be offered for you to check. 

Contact Ahonest Changjiang Stainless Steel with your enquiries for 440C stainless steel.

Contact:LIU

Email: sales(@)

PHONE：+86 18915272882