Corrugated Printing, Sloting & Rotary Die-cutting Machine

Feeding Unit

1, the feeding unit adopt SUN Extend-O-Feed Complete OEM Feeder System From USA.
2,Three shaft lead edge feeding.smooth and accurate.
3,Assistant suction(7.5KW),wind energy and press be controlled by transducer thereby adapt differ paper inquiry.
4,front baffle clearance adjusting adopt protruding wheel configuration also convenience and apply.
5,Provide paper glue roller adopt elasticity and fleac outfit.Not only ensure provide Veracity but also avoid press bad cardboard.Adjust capacity be controlled by electric machinery and showing nicety and trustiness by touch screen.
6,the high and Iow of the backstop and movement of the movement all controlled by the compressed airmotor,convenient and swift.
7,Eleclric control machine separation and reunion together with alarm bell.It will persist belling when traveling.Then insure safety of operator.

Printing Unit

1. all roller adopt super steel.Adjust by transfer balance and made by plating chrome and skiving.
2. Printing phasic adopt PLCtouch screen control and electric data 360 adjusl(when dynamic and static state should adjust.)
3. Roller transverse adopt electric control and transverse adjust distance is 20MM.It can should auto refer middle.
4. It has oil base ink monitor and control stop provide paper after alarm without oil base ink.
5. Load and unload space of printing, foot step switch control positive and negative turning.
6. The gap of the adjustment of the transfer roll impressing roll rubber roll and the anilox roll adopt squagging instruction
7. The feeding wheel adopt swift movement instruction.made the adjustment even swift and convenice.

Slotting Unit

1. It adopt single shaft double knife slotting.the pressing wheel as the same as the the slotting cutter head, the pressing effection even better.It's good for the producing processing after gluing box follow-on equipment.
2. It pre-pressing system.the paperboard can't easy to crush after pre-pressing.
3. Upper pressing wheel wrap rubber spring outside,don't damage the paperboard.
4. The gap of the pressing wheel feeding wheel and the slotting knife adopt squagging instruction.
5. Transfer of notch knife seat adopt ball bearing silk bar and long life and high nicety.
6. The pressing wheel, slotting knife seat sway adjustment at the same step. the electric adjusting.
7. Notch knife width 7.0 MM,it adopt alloy steel material. After heat treatment and grinding,blade tartness and long using life.

Rotary die-cutting Unit

1. Die-cut phase and the gap between the cutter mould rollers are both controlled by computer,which can display but aslo can to set up.
2. The cushion roller adopts mechanical camdrum portable structure (4Omm).
3. The gap between the cushion roller and the cutter mould roller adopts electrical adjustment.When stopping feeding paper,the soft will rise automatically;When working,the soft roller will return to the working position.
4. Adopt compentating system,No matter how much the cushion diameter changes.The speed of the cushion compentate and follow automatically ,without adjustment by man.
5. With restoration for cushion after wear and tear,Keeping the surface of the cushion smooth.

Piling Unit

1. Installed with safeguard mechanism the paper-receiving arm can be operated by hand or auto matically in order to prevent the sudden falling down of the paper-receiving arm for the safety of the operating personnel.
2. The rising and descending of the machine tool platform are driven by the powerful chain.
3. The height of piling is 1600mm.
4. With the paperboard's piling to the higher level the machine tool platform automatically adiusts the tilting height.Lifting and descending the electrical machinery. Equipped with the brake function,so the machine tool can keep the fixed position to prevent falling down.
5. The organization of lift the paper by pneumatic motion.The paper receiving tray will automatically open and catch the paperboard while the paperboards are piled to the planned height.
6. The surface corrugated belt can prevent the sliding of the paperboard.