Programmable Insulation / Withstanding Voltage Tester

Specifications

The input: Optional supply voltage 110V/220V, 40.0Hz~400.0Hz: The tester will first check whether the input power supply right connected to  N,L,G automatically after power on and give the prompt information if any of misconnection

1. Electric safety wall detecting function

2. Voltage rises as time, seeking for the breakdown points

3. Voltage falls as time, preventing reverse overshoot

4. Over-zero start prevents the damages for DUT

5. Test mode Programmable

6. Voltage rise, voltage fall, test and dwell time programmable

7. Lower and upper current programmable

8. ACW to DCW to IR automatic switching function

9. Auto shift range in IR

10. Standard PLC interface, optional ports: RS232, RS485

      (  level signal or contact signal can be selected as PLC test signal and if level signal selected, PLC high output level is 24V during the testing )

11. 50 memory groups, 30 steps per group

12. LCD contrast, buzzer volume, the retentive time of PASS signal can be adjusted by keystrokes

13. Control eight memory groups through PLC interface;Test results which maximum can be up to 9999 can be stored inside the tester or sent to the computer through RS232

FREQUENCY: (40.0~400.0)Hz

CE certificate

ACCESSORIES

Promote sales

Purchase one unit CS9922BX, you will get one hipot inspection box for free.

Hipot inspection box is used to do the everyday morning check.

Key Features: