High Quality Forged Helix Screw Anchor Rod Overhead Line Fittings

Thank you for you to pay attention to my product,If you want to know more about ,pls see under ;IF you have any question ,pls without contact me 

High Quality  Forged Helix Screw Anchor Rod Overhead line fittings 

Forged Helix Screw  Anchor Rod

Thimble Eye Anchor Rod

• Used for guying utility poles.
• Used with all types of expanding anchors.
• Contoured to prevent damage to strand.
• Unit weight :2kgs-15kgs
• 3-1/2" minimum thread length on all rods.
• Minimum tensile strength is 16000 lb.
• A heavy square nut is attached to every  anchor rod.
• Anchor Rods conform to IEEE Standard C135.2 (1999) and Bell Specification CAO 7082.
• Hot dip galvanized to meet ASTM Specification A153, Class B1 and C.

The fittings shall be delivered hot dip galvanized according to the following specifications:

• The Zinc that shall be used shall have the quality of minimum category prime western according to  the category Zn 98.5 according to ISO-1461.
• Then washed out with water and then flux treated and dried out.
• The hot dip galvanization shall be made in a Zinc bath of temperature 450°C and of Zn-composition min. 98,5%.
• The galvanization thickness shall be in average 86μm thick! On an isolated piece or on a small part of the surface the thickness can be a little lower, however on all pieces and on all surfaces the minimum thickness shall be 78μm and the average weight in relation to the galvanized area shall be 610 gr/m2.
• The pieces shall be after HDG free from black stains, enclosures of dirt, knobs, bubbles or any other surface defects. The HDG shall be smooth and uniform in the entire piece without any spots with too small or too big galvanization thickness otherwise the pieces will be rejected.
• The galvanization shall stick very well on the steel structure; it shall not be removed as a film but shall be as one with the steel body

Why Choose Us

•guarantee excellent workmanship

•Competitive price link fitting

•Small order accepted

•Prompt delivery

•Accurate CAD in drawing 

•L/C,T/T,Western Union short Payment