Birth Mark Removal Professional Skin Resurfacing Medical Fractional Co2 Laser Beauty Machine Spot Scar Pigment Removal

1. Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth,and density that are surrounded by a reservoir of spared epidermal and dermal tissue,allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser- delivery systems, enables high-energy treatments while minimizing risks.
   2.This machine use the RF Tube manufacturerd by Coherent America,the frequency can reach more than5000HZ,the high speed can work more efficiecnt and effectively,it is very good for the ultra pulse incision for the precise surgey,no blood,the treatment area is very clear,andless down time.

2. 
   

Specifications

100% High Quality Skin Resurfacing Acne Scar Removal Fractional Co2 Laser Beauty Equipment

Model NO.: LV-CO1,  fractional co2 laser beauty machine

Less pain, less skin damage high securtiy.

Suitable for all types of people and high return on investment.

Laser scanning handpiece with more accurate grinding, grasp the depth of treatment easily.

♥ What is the fractional co2 laser beauty machine effectively applied to?

•Reduce lines and deep wrinkles on the face

•Civatte

•Tighten skin on the face and neck

•Change the appearance of scars

•Improve skin tone around eyelids, jowls and neck

•Rejuvenate sun-damaged skin and improve texture

•Remove pigmented lesions

•Improve tone and texture on the chest, arms, and hands

  ♥  fractional co2 laser beauty machine working principle?

Fractional laser changes the firing pattern of light; every point sent out by the laser pulse is

composed of hundreds of micro-laser pulses, spot size of each micro-laser only ten square

nanometers, which can help the operator to control the skin treatment area more accurately,

and can adjust the cure depth according to different patients, more effectively act on the

target treatment area, such as epidermis and dermis.

During the therapy, the non-act on parts will diffuse the too much heat caused at the focus of micro-pulse, like a “bridge” or

“conveyor belt”, in order to avoid thermal injury. The light and heat biochemical reactions

promote the skin collagen regeneration; at the same time accelerate the skin natural healing

process, the new, smooth and delicate skin rebirth after the small scab falling off.

♥Why you can approve this  fractional co2 laser beauty machine is effective?

♥Specification of fractional co2 laser beauty machine

Features:

1. Reduced thermal damage to surrounding tissues

2. Rapid healing and minimal downtime

3. Stimulate deeper collagen with high pulse energy

4. LCD display panel provides easy operation with the latest microprocessor technology

5. Adjustable scanning patterns and size

6. Adjustable intensity of pilot beam from zero to maximum

7. Adjustable pulse duration

8. Last treatment setting memorization

9. Automatic alarm system for operation and troubles

10. Covers all functions of conventional system

11. No consumable costs  

  ♥ How long is  fractional co2 laser beauty machine procedure time?

With Fractional CO2, professional person will examine your face and calibrate the CO2 laser to meet your desired goals. Undereye wrinkles will require a less invasive penetration depth compared to the forehead because the skin is noticeably thinner under the eyes. Once calibrated, the area will be numbed with topical creams and anesthetic blocks in order to minimize pain. The CO2 laser procedure typically lasts one hour. We recommend about two hours for the fractional CO2 laser resurfacing treatment. The first hour will consist of a brief review of the pre and post treatment expectations. Once the patient is numbed with topical lidocaine and subcutaneous lidocaine, the laser treatment is begun, which usually takes one half hour to perform.

During the fractional CO2 laser treatment, patients usually feel heat and discomfort that is minimized by the application of a cooling spray called the Zimmer Cryo. This effectively reduces the discomfort associated with the procedure and is one of many mechanisms employed by professional persons to improve your experience during the procedure. Since the laser only takes 30 minutes to perform, professinal person can easily stage the procedure with small breaks to maximize your comfort level.

   ♥  Recovery after fractional co2 laser beauty machine

Recovery after the fractional CO2 laser varies, depending on the depth of the laser resurfacing peel. The SmartXide Fractional C02 laser offered at professinal clinics' minimizes recovery after treatment when compared to traditional carbon-dioxide laser resurfacing. Laser resurfacing with CO2 laser effectively ablates the skin, thereby shrinking the epidermis and dermis. The skin resurfacing treatment stimulates neocollagenesis and thus improves the texture, tone, resiliency, and tightness of the skin. We offer several depths of CO2 laser resurfacing and can tailor the CO2 laser to meet your specific requirements. 

After treatment with the Fractional CO2 laser, you will feel some slight swelling of the skin with mild tingling. Once the topical numbing medication wears off, you will feel some tingling of the skin for approximately 12 to 24 hours. It is recommended that patients take oral analgesic medications including Tylenol or ibuprofen post treatment to reduce the discomfort associated with the laser resurfacing. 

Most patients can drive home after the CO2 laser and beauty consultants will provide a detailed post treatment regimen to improve results and maintain a high level of safety with the laser. At home, patients are advised to dab the skin three times daily with a Domeboro soak and apply an ointment, as provided by beauty consultants. The ointment will maintain the moisture of the skin and allow for more rapid healing of the underlying epithelium. Follow-up appointments will be made within two to five days of the fractional CO2 laser resurfacing treatment and your beauty consultants are available 24 hours a day for questions related to the Fractional CO2. During non-business hours you may call beauty consultants' ofice and they will be able to provide you with assistance regarding your laser resurfacing treatment.

Once the laser treatment is complete, an assistant will help you wash off any residual numbing medication and apply an ointment to reduce inflammation and help the skin heal. This emollient base forms a protective environment for skin healing. Once the discharge criteria are met, you will be able to drive home. Follow-up appointments are made within several days of the procedure.

♥ Packing & shipping

  Strong and standard wooden export carton with full polyfoam or pearl wool.

 Shipping method:  

Fractional Co2 laser treatment:

Ultrapulse fractional co2 laser emits thousands of deep, tiny focal spot columns in your skin, called microscopic treatment zones. These lights penetrate into dermis skin, gasify the tissues around wrinkles and scars in an instant and make a signal of compounding collagen like tissues repair, collagen rearrangement ettc to regain a new fresh and healthy skin of youth.

♥ After-sale service

   1. 24 months free warranty and forever technical support. 

   2. Any questions/service can be replied within 16 hours.  

  ♥ How does Guangzhou LoveL Beauty  Equipment CO., Ltd process mutual cooperation?

♥ All Items will be shipped in 1-5 working days with a TRACKING number for your reference!

♥ Estimated delivery time is 3-4 business days depending on the destination country!

♥ ALL items will be tested to ensure quality before shipping!

♥ PLUS, We will dispatch the package in good protection to ensure a safe shipping all the way!

♥ 100% Guarantee on all our Beauty Equipment! All machines comes with 1 or 2 year full warranty, but honestly,We will offer you LIFE TIME free online advise, help and the best after sale service even after years, so if you buy the machines from us, We will always be there for you!

Brief Introduction

Refine super pulsed CO2 laser Refine is a classic minimally invasive laser equipment for dermatologic surgery. This latest super pulsed laser emission system delivers hundreds of orderly micron pulsed laser beam on skin lesions, for controllable and accurate treatment by means of adjusting the size, density, distance,nature of the multiple arrays, and the diameter and the depth of the pore.

The treatment of Refine is very safe and can cover any part of the body. Its applications include a variety of wrinkles(forehead lines,eyebrow lines,eye wrinkles,perioral wrinkles,neck lines,stretch marks etc.),sagging skin, drooping eyelids, eyes bags, acne(whelk) marks, all kinds of scar(trauma scar,burn scar,suture scar),stains etc.