Mig Welder Torch Plastic Liner with Yellow Color

Mig Torch Liner for mig torches.

Available Sizes

0.6mm to 0.9mm wire 3 metre Blue
0.6mm to 0.9mm wire 4 metre Blue
1.0mm to 1.2mm wire 3 metre Red
1.0mm to 1.2mm wire 4 metre Red
1.0mm to 1.2mm wire 5 metre Red

TFM124.0041 1.6mm wire 3 meters Yellow

TFM124.0042 1.6mm wire 4 meters Yellow

TFM124.0044 1.6mm wire 5 meters Yellow

Correct Liner Fitting
The liner transports the mig wire from the wire feed unit through the length of the mig torch to the contact tip where it picks up the welding current.
To fit the liner unscrew and remove the liner nut at the euro connector end (wire feed end).
Remove the gas nozzle and contact tip. 
Insert the liner fit the liner nut and cut off the excess liner flush with the tip adaptor.
Screw in the contact tip which will be tensioned against the liner to ensure no there is no gaps in the feed.
If the contact tip is to tight to insert cut the liner back to suit.  

Company Information:

1. Specilizing in MIG Guns, TIG welding Torches, plasma torch and other related welding products.

2. Passed international certificate as CE.

3. Provide OEM and ODM service to overseas customer.

4. Export to more than 15 countries, such as USA, Brazil, Chile, Australia, Denmark, Spain, Poland, Indonesia, Singapore, etc.

1. OEM & ODM are welcome.

2. CKD & SKD are available.

3. tried orders are available.

4. samples can be supplied.

 Q1: Can I have a sample for testing?

A: For regular goods, we can afford samples, the sample cost is different from the amount you want. For our new products, there is a MOQ of the samples.

Q2: Can I add my logo on my welding products?

A: Yes, but you should send us the trademark authorization letter.

Q3: Do you have inspection procedures for welding products?

A: 100% self-inspecion before packing.

Q4: Can I mix diferent goods in an order?

A: yes.