Wood line and door frame production line

Standard Technique Parameters

Dimensions

6.5*2.3*2.2 (m)

Weight of the machine

1000 kg

Min processing length

700 mm

Max processing width

70 - 300 mm

Max processing height

5 - 80 mm

Conveying speed

10 - 15 m/min

Transmission power

0.75 KW

Fan power

1.5 KW

Pump power

0.75 KW

Working gun

6

Gun caliber

0.8/1.0/1.3 mm

Types of paint

PE, PU, UC, NC, UV, Waterborne paint

The amount of paint used

60-200g/ m²

Air pressure

0.6MPA

Air flowing

2400L/min

Power supply

380V 50HZ (three-phase four-wire power line power supply)

1. PLC controller controls each spray gun’s switch independently.

2. Automatic identification infrared sensor is provided to test the product’s length and width. PLC adjusts spray gun’s position automatically.

3. The automatic spray gun is imported from Japan originally — Anest or Meiji spray gun. Each spray gun can be control separately.

4. Equipped with Waste gas purification system.

5. Stable paint supply is offered by a set high-capacity diaphragm pump and stabilizer.

6. The conveyor’s speed can be frequency conversion.

7. The paint recovery device can recycle 70%-80% wasted painting.

Standard Technical Parameters

Dimensions

12*1.5*1.85 (m)

Min processing length

0.3 m

Max processing width

1.22 m

Max processing height

0.2 m

The power of transmission

0.75 KW (frequency conversion)

Conveyor speed(sending speed)

0 – 6 m/min

1. Using the heating theory, the machine can speed up the paint thinner’s volatilization and shorten the drying time.

2. You can choose the infrared ray to heat if it is needed.

3. The fan can drive the air to circulate, which can speed up the paint thinner’s volatilization.

4. The way to deliver adopts the conveyor which includes heat-resistant chain and stainless steel circular tube.

5. Equipped with automatic temperature control device to adjust the temperature.

6. Recycle to use the mixed flow to save energy.

7. When the air comes into the machine, the air can be filtered. The air draft can be adjusted.

Standard Technical Parameters

Dimensions

1.4*1.8*1.5 (m)

Max processing length

2.4 m

Max processing width

1.22 m

Max processing height

0.1 m

Weight of the machine           

1000 kg

1. To increase the system security, it is equipped with scram button to control.

2. It is equipped with stepless adjustment to transfer and preventing deviation stable device to make sure that it transfers smoothly.