Cement pressure testing machine

LKK418 Cement Pressure Testing Machine Introduction:

Cement Pressure Testing Machine is mainly used for compressive strength and flexural strength tests and tests of cement, mortar and concrete specimens of red bricks and other building materials.
This machine adopts hydraulic loading, electronic measuring, with a load figures, loading rate shows maximum load to maintain, as well as overload protection and power data retention capabilities.

LKK418 Cement Pressure Testing Machine Main Specification:

The biggest test: kN300
Test force measurement range kN: 4% -100% FS
Test Force showed: the relative error ≤ ± 1% of indicated value
Test Force Resolution: 0.01kN
Pump rated pressure: 25MPa
Loading rate: 0.3KN / S ~ 10KN / S
Loading speed error: ± 5%
Pump rated flow: 1.52L / min
Upper and lower bearing plate size: φ155mm
The maximum distance between the upper and lower plate: 260mm
Piston diameter: φ130mm
Piston stroke: 60mm
Motor power: 0.75 kW three-phase
Host Dimension mm: 870 × 450 × 1400mm
Weight: 450Kg
Packing List
Tester Host: 1 set
Controller: 1 set
Lenovo: a station
Black and white inkjet printer: 1 set
Wear hydraulic oil: 1 barrel
Instructions: 1
Certificate: 1
Packing List: 1