Stone Shaft Impact Crushing Machine

Specifications

When selecting jaw crusher liner, the user typically must consider three factors: production, consumption, liner wear. According to the following general principles: maximum feed size, change size, and feed particle size distribution, material hardness, wear resistance materials. Jaw crusher liner longer the power is higher, hard materials to choose a short liner, soft material selected long liner, in the distribution of materials, fine material to choose a short liner, coarse material selected long liner. of Stone Shaft Impact Crushing Machine

After PE 600* 800 F 4 Stone Shaft Impact Crushing Machine normal operation before feeding. Be crushed material should be uniform to join the crushing cavity, and should avoid feeding side, to prevent the sudden increase in load mutation or unilateral Bearing areas are the most vulnerable components, because it is in use, wear large need for regular maintenance, regular oil to increase bearing life.

Features

Stone Shaft Impact Crushing Machine Large Crushing Force, Stable

Stone Shaft Impact Crushing Machine Operation Notes:

Because of the low initial high manganese steel hardness, low yield strength, impact strength in the non-conditions, the work hardening is not sufficient, easy flow and are cutting. To improve the life of the jaw, the development of the Sino-manganese steel. The steel was first invented by the Climax Molybdenum Company, and in 1963 officially included in the US patent. Its cast microstructure of austenite and martensite and a small amount of pearlite, the water toughening treatment, their organizations into a single austenite or austenite + a small amount of undissolved carbides (depending on the carbon content) tissue. Since then people have done a lot of research in manganese, that its hardening mechanism is: after lower manganese content, the austenite stability decreased in impact or abrasion, the austenite-prone strain-induced martensitic transformation, so that the wear resistance [4,7,8]. The manganese component is generally: 0��7% ~ 1.2% C, 6% ~ 9% Mn, 0.5% ~ 0.8% Si, 1.2% Cr, and other trace elements such as V, Ti, Nb, RE and the like. In manganese steel jaw in practical applications has also made good use of effects, such as the ratio of manganese steel jaw life increased by more than 20% [4,9,10] crushing silica, while the cost of high-manganese steel jaw quite. Therefore, in the medium and small jaw crusher used in manganese steel is a material worthy of the jaw.

Maintenance & Attention

To Choose a Right Stone Shaft Impact Crushing Machine

Optional spring cone crusher is also noted that when the feed size and equipment of the nesting size, shape and size of these parts directly affects the operational efficiency of the cone crusher. If the spout is too big or too small, so that operating power greatly increased, it may lead to substandard materials and components cone crusher for a great deal of damage.