Three Stage Cone Crusher

Specifications

Choice of jaw crusher feed size is to look at the principles and discharging grain size of the decision, the Liaoduo large, coarse granularity, the selection of super coarse type or coarse type, whereas the medium and fine type. In calculating the feed size, with the largest open side inlet size multiplied by 0.85 as an alternative feed of dimensions, while the average size of the product is the biggest crushing ratio is calculated by dividing the feed. Jaw crusher feed on grain size distribution, in general, smaller than the closed side of the discharge port of the material must not exceed 10%, if more than 10%, the increase in power consumption, product size becomes . of Three Stage Cone Crusher

Rotating System: the movable jaw, eccentric shaft, consisting of bearings, pulleys and other parts, is the main part of the jaw crusher drive and endurance. Jaw crusher pre-start checks whether the ore crushing cavity or other debris should be removed immediately if

Features

Three Stage Cone Crusher Long Service Life, Large Feeding Size, Stable Reasonable Design, Low Cost Spare Parts,

Three Stage Cone Crusher Operation Notes:

Broken jaw broken jaw cut the belt conveyor is regularly driven machine stone production line conveyors are indispensable to adjust the tightness of credit on a regular basis to ensure that both sides of the triangle conveyor belt conveyors should be grouped by force optional dual-motor drive it every time they leader degree as consistent as possible. If found too much wear on the belt, please immediately replaced. Jaw crusher sudden shutdown: Clear the discharge port blockage, ensuring a smooth flow of material; 2) tighten or replace V-belt; 3) reinstall or replace adapter bushing; 4 ) alignment workplace voltage, to conform to the requirements of the host operating voltage; 5) Replace the bearings.

Maintenance & Attention

Crusher has a unique working mechanism and structural design features. In the use of performance characteristics, impact crusher and hammer crusher has obvious technical advantages: a uniform particle size, the material showed a cubic shape, fine materials and low dust content, especially for vertical mill run; run low cost, low investment costs; crusher machine total weight lighter than the hammer crusher, small size, low static and dynamic load values, can effectively reduce the construction costs; required motor power is low, the device can effectively reduce consumption power, reduces operating costs; crusher wear parts and long service life, low long-term operating costs.

To Choose a Right Three Stage Cone Crusher

Productivity and productivity nature of the ore cone crusher, crushing chamber shape, the type of crusher, specifications and operating conditions, and many other factors, but also with the crusher in the process configuration status. There is currently no method to fully reflect the theoretical calculation of these factors are generally calculated using the following empirical formula. When broken open, cone crusher productivity. Q = K1K2q0eδ / 1.6 (t / h)