Track Mounted Jaw Crusher

Specifications

Lubrication jaw crusher can often work and timely attention to ensure the normal operation of the friction surface and extend the life of the equipment. Add as 50-70%, the carrying capacity of oil must be replaced every three months, oil change, application of clean gasoline or kerosene carefully cleaned roller bearings. Bracket and bracket pad contact, before oil began to enter the crusher. of Track Mounted Jaw Crusher

After PE 700* 100 N 1 Track Mounted Jaw Crusher normal operation before feeding. Be crushed material should be uniform to join the crushing cavity, and should avoid feeding side, to prevent the sudden increase in load mutation or unilateral Bearing areas are the most vulnerable components, because it is in use, wear large need for regular maintenance, regular oil to increase bearing life. Steel jaw crusher requires large furnaces for melting the steel mold casting. Now basically used electric furnace, the higher the production process. General by a professional casting plant jaw crusher housing body processing.

Features

Track Mounted Jaw Crusher Long Service Life, Large Feeding Size, Can do Hard Stones, Low Cost Spare Parts,

Track Mounted Jaw Crusher Operation Notes:

Broken jaw broken jaw cut the belt conveyor is regularly driven machine stone production line conveyors are indispensable to adjust the tightness of credit on a regular basis to ensure that both sides of the triangle conveyor belt conveyors should be grouped by force optional dual-motor drive it every time they leader degree as consistent as possible. If found too much wear on the belt, please immediately replaced. Jaw crusher sudden shutdown: Clear the discharge port blockage, ensuring a smooth flow of material; 2) tighten or replace V-belt; 3) reinstall or replace adapter bushing; 4 ) alignment workplace voltage, to conform to the requirements of the host operating voltage; 5) Replace the bearings.

Maintenance & Attention

Impact crusher is suitable for both soft material also applies to the hardness of the material is very large Crusher hammer plate with mechanical clamping structure firmly fixed on the rotor, with a great moment of inertia when the rotation with the rotor. With respect to the hammer crusher (hammer was hanging state), rotor crusher has a greater momentum, crushing harder to adapt to the material, they at the same time lower energy consumption. Can easily be flexibly adjusted discharge size, wide adjustment range Counterattack crusher through a variety of ways to adjust the expected size, such as adjusting the rotor speed, adjust the gap back plate and the grinding chamber and so on. Gap can be adjusted by adjusting the mechanical or hydraulic, hydraulic adjustment system can be easily operated locally by a button or fortune control system to complete the adjustment of the gap. The hammer crusher discharge size adjustment can only achieve by replacing the bottom of the sieve.

To Choose a Right Track Mounted Jaw Crusher

Productivity and productivity nature of the ore cone crusher, crushing chamber shape, the type of crusher, specifications and operating conditions, and many other factors, but also with the crusher in the process configuration status. There is currently no method to fully reflect the theoretical calculation of these factors are generally calculated using the following empirical formula. When broken open, cone crusher productivity. Q = K1K2q0eδ / 1.6 (t / h)