Two Roller Crusher

Specifications

Because of jaw crusher is intermittent work (low efficiency, high energy consumption), that is working stroke and idle stroke, making the motor load is very uneven. Thus both ends of the eccentric shaft being provided with a flywheel, so that in the idle stroke the stored energy, so that when the working stroke and then all the energy released. Jaw crusher before starting bearing lubrication should be carefully examined the situation is good, whether the bearing bracket junction has enough grease. of Two Roller Crusher

After PE 700* 200 B 2 Two Roller Crusher normal operation before feeding. Be crushed material should be uniform to join the crushing cavity, and should avoid feeding side, to prevent the sudden increase in load mutation or unilateral

Features

Two Roller Crusher Long Service Life, Large Feeding Size,

Two Roller Crusher Operation Notes:

When crushed as a result of the crushing cavity material obstruction caused by parking, you should immediately turn off the power to stop running, will clean up after the crushing cavity material before re-starting.

Maintenance & Attention

Different structure and operating principle, commonly broken machinery main jaw crusher, impact crusher, hammer crusher, cone crusher and roll crusher and so on, each product will, depending on the production requirements into different standard models. Although many types of broken machinery, but by force methods, the material has a crush crush, the provision of broken, broken off, impact crushing and grinding methods. Former customers in the selection crushing equipment, first according to the material properties of the particles, crushed product, size requirements, take the appropriate way to determine the crushing force urging the way, and then determine the crushing device model.

To Choose a Right Two Roller Crusher

Select comprehensive proposal cone crusher: 1, material handling hardness, hard broken, should choose multi-cylinder hydraulic cone crusher; 2, handle high abrasive, large water content material, should choose the speed cone crusher; 3, the processing of final products, especially thin material, should choose high-speed cone crusher; 4, treatment of soft material, should choose the bottom of single-cylinder hydraulic cone crusher, etc.