Toggle Plate For Jaw Crushers

Specifications

Because of jaw crusher is intermittent work (low efficiency, high energy consumption), that is working stroke and idle stroke, making the motor load is very uneven. Thus both ends of the eccentric shaft being provided with a flywheel, so that in the idle stroke the stored energy, so that when the working stroke and then all the energy released. Jaw crusher before starting bearing lubrication should be carefully examined the situation is good, whether the bearing bracket junction has enough grease. of Toggle Plate For Jaw Crushers

Jaw crusher before starting guards should carefully check is good, found to be unsafe, should immediately eliminate it.

Features

Toggle Plate For Jaw Crushers Long Service Life, Large Feeding Size, Stable Can do Hard Stones, Low Cost Spare Parts,

Toggle Plate For Jaw Crushers Operation Notes:

Welded steel jaw crusher welded steel, no large-scale furnace equipment and the like. Relatively easy to spot. But for demanding welding process. And welded steel casing to a second overall warming, in order to ensure the welding flat horizontal force housing.

Maintenance & Attention

At present, the majority of domestic crusher hammer high manganese steel materials, the wear resistance is not enough, life is very short. Limestone crusher hammer generally use 60 to 90d, in some special conditions, the use of less than 7d. And because the hammer at work suffered the impact is not large, the high-manganese steel hammer hardening effect was not significant, and its anti-erosion wear poor. Because Cr austenitic can play to strengthen and improve the role of steel hardness, strength and wear resistance, so the addition of Cr in the high-manganese steel, the hammer can be greatly strengthened. When broken ore, hammer life increased by 50% than ordinary high manganese steel,

To Choose a Right Toggle Plate For Jaw Crushers

Cone Crusher Parallel with length in order to ensure that products meet the crusher crushing crushing the lower chamber required fineness and evenness, cone crusher are set for some parallel broken belt, the ore in the parallel band at least to accept a check of broken . Parallel with length L and crusher type and size related. For crushing cone crusher with L = 0.16D; for broken cone crusher with L = 0.085D. Where D is the maximum diameter of the cone movable lower part.