Top Advanced Jaw Crusher With 200-580T/H

Specifications

Structural condition of the jaw crusher: jaw crusher is mainly composed of a fixed body, rotating body parts, safety device, adjusting devices and other components. Jaw crusher is one of the most important equipment components crushing production line is mainly used for a variety of ores and bulk materials of medium-grained broken, widely used in mining, smelting, building material, highway, railway, water conservancy and chemical industry . Maximum compressive strength of the material to be broken as 320MPa. Jaw crusher in mining, building materials, infrastructure and other sectors is mainly used for crushing machine and the broken machine. of Top Advanced Jaw Crusher With 200-580T/H

After Top Advanced Jaw Crusher With 200-580T/H start, if found to have unusual circumstances, should be immediately stopped, the reason to exclude risks to be identified before they start again When running Top Advanced Jaw Crusher With 200-580T/H prohibited standing near, touch the body, adjusting, cleaning or maintenance, etc; Because of its simple structure, reliable operation, easy maintenance and repair, as well as low cost, present in our mines are widely used, basically use it to crushing hard and medium hard ore (rough broken and in pieces)

Features

Top Advanced Jaw Crusher With 200-580T/H Long Service Life, Large Feeding Size, Reasonable Design, Mutiple Size,

Top Advanced Jaw Crusher With 200-580T/H Operation Notes:

Because of the low initial high manganese steel hardness, low yield strength, impact strength in the non-conditions, the work hardening is not sufficient, easy flow and are cutting. To improve the life of the jaw, the development of the Sino-manganese steel. The steel was first invented by the Climax Molybdenum Company, and in 1963 officially included in the US patent. Its cast microstructure of austenite and martensite and a small amount of pearlite, the water toughening treatment, their organizations into a single austenite or austenite + a small amount of undissolved carbides (depending on the carbon content) tissue. Since then people have done a lot of research in manganese, that its hardening mechanism is: after lower manganese content, the austenite stability decreased in impact or abrasion, the austenite-prone strain-induced martensitic transformation, so that the wear resistance [4,7,8]. The manganese component is generally: 0��7% ~ 1.2% C, 6% ~ 9% Mn, 0.5% ~ 0.8% Si, 1.2% Cr, and other trace elements such as V, Ti, Nb, RE and the like. In manganese steel jaw in practical applications has also made good use of effects, such as the ratio of manganese steel jaw life increased by more than 20% [4,9,10] crushing silica, while the cost of high-manganese steel jaw quite. Therefore, in the medium and small jaw crusher used in manganese steel is a material worthy of the jaw.

Maintenance & Attention

Different structure and operating principle, commonly broken machinery main jaw crusher, impact crusher, hammer crusher, cone crusher and roll crusher and so on, each product will, depending on the production requirements into different standard models. Although many types of broken machinery, but by force methods, the material has a crush crush, the provision of broken, broken off, impact crushing and grinding methods. Former customers in the selection crushing equipment, first according to the material properties of the particles, crushed product, size requirements, take the appropriate way to determine the crushing force urging the way, and then determine the crushing device model.

To Choose a Right Top Advanced Jaw Crusher With 200-580T/H

Optional spring cone crusher is also noted that when the feed size and equipment of the nesting size, shape and size of these parts directly affects the operational efficiency of the cone crusher. If the spout is too big or too small, so that operating power greatly increased, it may lead to substandard materials and components cone crusher for a great deal of damage.