White Silica Sand

Specifications

White Silica Sand crushing action is carried out intermittently. This crusher due to simple structure, reliable and able to crush hard materials, etc. are widely used in mineral processing, building materials, silicate and ceramic industries. Adjusting device: The device is used to adjust the size of the nesting population size, control jaw crusher discharge size. I plant jaw crusher adjustment mechanism has two forms: mention long wedge and mandrel type gaskets, flexible and easy to adjust, to achieve stepless adjustment of White Silica Sand

Jaw crusher after a period of time, should bear the hub again tightened to prevent loosening tight bushing damage the machine.

Features

White Silica Sand Long Service Life, High Crushing Ratio, Operate Easily, Reliable Motor, Low Cost Spare Parts,

White Silica Sand Operation Notes:

Because of the low initial high manganese steel hardness, low yield strength, impact strength in the non-conditions, the work hardening is not sufficient, easy flow and are cutting. To improve the life of the jaw, the development of the Sino-manganese steel. The steel was first invented by the Climax Molybdenum Company, and in 1963 officially included in the US patent. Its cast microstructure of austenite and martensite and a small amount of pearlite, the water toughening treatment, their organizations into a single austenite or austenite + a small amount of undissolved carbides (depending on the carbon content) tissue. Since then people have done a lot of research in manganese, that its hardening mechanism is: after lower manganese content, the austenite stability decreased in impact or abrasion, the austenite-prone strain-induced martensitic transformation, so that the wear resistance [4,7,8]. The manganese component is generally: 0��7% ~ 1.2% C, 6% ~ 9% Mn, 0.5% ~ 0.8% Si, 1.2% Cr, and other trace elements such as V, Ti, Nb, RE and the like. In manganese steel jaw in practical applications has also made good use of effects, such as the ratio of manganese steel jaw life increased by more than 20% [4,9,10] crushing silica, while the cost of high-manganese steel jaw quite. Therefore, in the medium and small jaw crusher used in manganese steel is a material worthy of the jaw.

Maintenance & Attention

At present, the majority of domestic crusher hammer high manganese steel materials, the wear resistance is not enough, life is very short. Limestone crusher hammer generally use 60 to 90d, in some special conditions, the use of less than 7d. And because the hammer at work suffered the impact is not large, the high-manganese steel hammer hardening effect was not significant, and its anti-erosion wear poor. Because Cr austenitic can play to strengthen and improve the role of steel hardness, strength and wear resistance, so the addition of Cr in the high-manganese steel, the hammer can be greatly strengthened. When broken ore, hammer life increased by 50% than ordinary high manganese steel,

To Choose a Right White Silica Sand

Optional spring cone crusher is also noted that when the feed size and equipment of the nesting size, shape and size of these parts directly affects the operational efficiency of the cone crusher. If the spout is too big or too small, so that operating power greatly increased, it may lead to substandard materials and components cone crusher for a great deal of damage.