Rubber Kneader 110L

 rubber kneader/ mixing mill/ Banbury Intensive mixer / dispersion mixer

Usage:

 The rubber kneader is mainly used for plasticating and mixing rubber and plastics, and also applicable for mixing or kneading sticky materials.

Features:

1. With completely sealed condition, materials are mixed or plasticated under certain pressure, controllable temperature, which makes high production efficiency and obtains excellent stable quality.
2. Spiral angle and over lapping length of the blades of the rotors are of reasonable design and make the materials to be dispersed uniformly.
3. Surface where is contacted with the materials are all plated with hard chromium and polished, which is corrosion-resistant and wear-resistant.
4. Jacket construction is adopted in parts that surfaces contact with materials to achieve excellent water-cooling or steam heating effect and fit in with the needs of plastics and rubber precessing technology.
5. Feeding from back door on the frame(or a separate top door)is convenient for continuous process operation in a production line. The mixing chamber is able to turn forward by 140°around the front rotors to discharge and is easy for changing pigments and cleaning the chamber.
6. Programmable logic controller(PLC) is adopted in the electric-control system, which has reliable control function and alarm function, and interlock safety-protection function and it is procuded with serial interface of net.

Technical parameters:

model: X(S)N-110 

Total kneading volume of mixing chamber 250L

Total mixing volume of mixing chamber 110L

Main motor power 185KW

Tilting Motor Power 7.5 KW 

Tilting angle 140

Rotation speed of front/rear rotor: 30/24.5r/min 

Compressed air pressure: 0.6-0.8MPa

Cooling water pressure: 0.2-0.4 MPa

Steam pressure for heating: 0.5-0.8 MPa

Overall size: 4075x2712x3580mm

Weight around 14970kg