CCTV Camera LED Strips LCD 180w 12v 15a Switch Power Supply With CE ROHS Approved

CCTV Camera LED Strips LCD 180w 12v 15a switch power supply with CE ROHS approved

1. High efficiency, long life and high reliability;

2. Low DC ripple, high efficiency;

3. Low operation temperature & long performance life;

4. Input voltage suitable for the world;

5. Excellent insulation property, high dielectric strength;

6. 100% full-load burning test;

7. 1 year's warranty.

1. Select the correct input voltage and the input and output connection method.

2. Do not peel off the power before installing a protective layer to prevent foreign matter falling into the lead when the power supply is damaged.

3. After installation please tear in addition to the protective layer, so as not to affect the power cooling.

4. To avoid electric shock, do not disassemble the power supply chassis.

Product installation instructions:

1.The installation, use a length of less than 4mm screw to fix the power supply reliability.

2. Before the installed power run, check and proofread each wiring terminals on, make sure the input and output, AC and DC, positive and negative voltage And current values such as the right to eliminate wrong connection reverse phenomenon, to avoid damage to the power supply and user equipment.

3. Use a multimeter to measure power before hot, neutral and ground short circuit, the output is shorted; load when power is the best start.

4. Do not exceed the power supply when using the nominal value, so as not to affect the reliability of the product. To change the power supply output parameters, the power supply to the customer before using our technical Surgery department consulted to ensure the use of the product and reliability.

5. In order to ensure the safety and reduce the use of interference, ensure reliable grounding ground (grounding wire more than AWG18 #).

6, In order to extend the life of power, our company can provide duct design solutions.

7. Do not frequent switching power supply, or affect their life.

8,If you have any problem during the usage, such as power failure, please do not repair them by yourself, please contact the company as soon as possible to resolve.

•  100% burn-in test before shipment
•  OEM & ODM packing design acceptable
•  24 months quality guarantee service
•  quick response about RFQ within 6 hours
•  sampling support (1~5 pieces)
•  for LOGO printing, MOQ could be 300~500 pcs
•  product OEM & ODM welcome.
•  Shipping ways: Sea, air or courier.