New infusion pump for Ebola--MSLIS04a

Specifications

                                          New infusion pump for Ebola--MSLIS04a

Our research and development production of MSLIS04 " New hospital infusion pump", is national patent product and synchronization of the fluid control and heat control. It fills the gap in the industry, and has the following characteristics and Clinical Significance

Characteristics:

1. Infusion control + temperature control, dual control functions

2. In the low temperature, four levels warmer setting to improve comfort and reduce side effects.

3. Arbitrary infusion rate and automatic adjustment, infusion accuracy of ± 5% to guarantee accurate infusion.

4. Three modes in one : drop / min, ml / h and time patterns

5. Friendly interface, keyboard visual simplicity, and just put tube into the heated rotating disk then connect power began to heat.

6. Monitoring timely, multiple alarm, safety and reliability; simplified care and accompany process

7. Energy-saving environmental protection, power is only 1 watt (no heating state), without any pollution and waste, full power can be used for more than 8 hours

8. Compact, weighing only 420 grams (including battery), which blossoms placed in the infusion chair, hanging rail tube, etc., no special supplies, it is security, economic, scientific device

9. Applicable to a wide range: can be applied in transfusion, blood transfusion and transmission occasions nutrition

Clinical Significance of infusion warmer:

1. Infusion heating can eliminate or reduce the liquid temperature is low due to infusion reactions caused, especially to the elderly and children with body when the cold infusion, vascular spasm, pain, chills, stomach pain, cough and other adverse stimuli, have to eliminate or reduce the effect;

2. To eliminate or reduce the the physical consumption paid for the balance of temperature of the liquid

3. To improve the speed of molecular movement is conducive to full efficacy, easy to absorb;

4. Improve the infusion rate, shorten the infusion time

5. If the long-term low-temperature fluids, prone to hardening of the arteries, especial in Spring, Autumn and Winter is more obvious, infusion warmer can make the infusion is not cool and no pain, making treatment more humanized.

6. Heating can eliminate the low-temperature dissolution of pharmaceutical dispensing and patient infusion bad cold phenomena. January 2006 revised American Association of Transfusion Standard of care was also raised that heated to 35 °C before dispensing liquid.

Technical specification and Functions