Professional DSP Network Digital Amplifier - C-Mark NET6000D

Specifications

Remote Control

By using software on PC, and through RS485 interface, C-MARK nework digital amplifiers can monitor working temperature, current, voltage, malfunction, protection status; and can realize Equalizer, Compressor, Crossover, Each channel delay, Gain & Sensitivity Control, etc.

Network audio siganal receiving

C-MARK network digital amplifier can realize CobraNet transmitting, and receiving remote Network audio siganal.

Power sound, lighter weight

Compare with ordinary amplifiers, it can provide more power, efficiency, and better heat emitting. Highly reduced the dimension, weight and power consumption. Power output efficiency reach 95%, only 5% heat consumption.

One of the most wonderful feature is: the efficency is nealy independed for the output. Ordinary amplifiers can get Maximal efficiency only under the maximal power output. Usually, there are 40% average power density, ordinary amplifier will emit 10 times more heat than C-MARK digital amplifiers under the same volume.

Accuracy of sound

Cystal clear high frequency, compact powerful low frequency, the most accuracy sound signal rebuild, patent design ensure the high performance parameter, such as: distortion, frequency response, convert rate, power supply band width, and damping factor.

Full digital, high reliability

C-MARK digital amplifiers are based on PWM technology which has been 30 years in the field of power converters. It provides the reliability, mini-size, light weight and high efficiency.

C-MARK digital amplifier will correct any possible error during operating, it can work under every situation. It can provide maximal power and safety, and durable using

Specifications

Power:

8Ω 1000W×2

4Ω 2000W×2

2Ω 3000W×2

Bridged power:

8Ω 4000W

4Ω 6000W

Bandwidth: 5Hz-28KHz

S/NA-Weight 20Hz-200Hz: >108dB

Input: Balanced to ground,XLR female combo jack 6.3 mm, 

Digital Input: RJ45 CobraNet port

Output: Neutrik 4-pole Speakon connectors

Voltage: AC100V-240V 50/60Hz

Other specification:

Audio signal input connector: Balanced XLR

Output connector: Neutrik speakon

Dimension483 * 445 * 44 mm   W * D * H

Weight11.5Kg

Contact: Mr. Brock Lan  (already has ten years experience in pro audio industry)

Cell: 0086 1302 668 3366