hydraulic cylinder tester MYHT-1-2

Standard Packaging

hydraulic cylinder tester MYHT-1-2  

MYHT Hydraulic Tester, researched and produced by Jinan High Land Hydraulic Pump CO., Ltd. is a kind of practical and new type product with patent,

In the hydraulic loop system, the acquisition of breakpoints data and the measurement of flow rate, pressure and temperature of the system and components are able to be realized simultaneously. Through the data acquired MYHT Tester evaluates the performance of the system and components and judges the faults. It is widely used in testing and diagnosing for Hydraulic Pump, Hydraulic Motor and Hydraulic valve.

In the design, MYHT Series Hydraulic Pressure Tester is a device that can be used for many years and with less trouble, If trouble arises after the quality guarantee period, it is available to do some simple inspection.

1. Loading Valve

If the Loading Valve can't load the system, remove the alve spool and check if there are impurities on it or worn-out parts or or damages on seal ring.

2. Battery

The batteries for the meters are 12V lithium battery. Charge 4-8 hours before the tester work, and the battery can be used for 30 hours. It is necessary to charge the batteries with supporting charger, otherwise, explosion danger will easily arise.

3.Flow Meter

When the Flow Meter doesn't display the reading, it is possible that the turbine rotor is stuck. Take turbine sensors apart and remove the impurities prevent of the turbine from flexibly rotating.

After refitted, check the flow readings. If the Flow Meter still not display any reading, please contact the manufacturer.

Prompt for testing the Servo Control Pump, Motor and valve.

Special test procedure should have detailed regulations. It is necessary to learn the instructions from the relevant manufacturer of hydraulic equipment and hydraulic components.

MYHT-1 Series Hydraulic Tester Feature:

High precision - scale span ± 1%.

Turbine flow sensor - fast response, antipollution, low pressure loss.

With fast-measuring, high-accuracy and good-stability Platinum Resistance Temperature Sensors:

Flow and temperature display -- using four LED digital tube, free of low temperature limit,

Instantaneous flow rate 0.000-9999, breakpoints data keep 10 years.

Pressure indication: Seismic-resistant gauges with super stable and overload ability.