CT room door

Specifications

Siemense accelarator protection door

1. Our sliding doors are driven by electricity. In case of power off, it can also be pushed manually. It is made with elegant appearance,smooth transmission and low noise. The door surface unevenness is not more than 5mm. The gap between door and the wall is not more than 10mm. This will also depends on the evenness level of your wall.
 
2. Our sliding door takes the structure of top-suspension and electricity driven.
 
3. Our door body takes metal lead as protection material. The frame was welded by U-steel and steel plate. It is solid and Ragid.
 
4. The door surface can be coated with aluminium plastic board and other material as per your request.
 
5. The door covers the wall hole on the top,left and right side.
 
6. Reliable machine and door co-lock. When the door is open, then the equipment inside the working chamber can not work. When the equipment inside the working chamber is working, then the door can not be opened.
 
7. There is safety E-eye protection system for unti-squeezing when the door is in the progress of closing. When the door is closing and some people pass by at this moment, the door will stop closing for safety.
 
8. In case of power off, our electricity driven sliding door can also be opened or closed by hand manually.
 
9. There are two limit switch at the door running end. If one of the switch doesn't work, then the other one will work.
 
10. Our door takes specilized transmission device,gear wheel and rack. The electric motor is powerful with low noise.
 
11. Our door takes the control of frequency conversion. The door running speed is adjustable. It can speed up or slow down or brake automatically.