5.1 Channel Audio Decoder with Remote Control and Video

5.1 Channel Audio Decoder with Remote Control and Video

Features 

1.Two-Ports SPDIF(1xOptical and 1xCoaxial) digital audio input,one USB2.0 interface,You can switch freely between different signal sources.
2.Output 5.1 channel analog audio and 1xCVBS, can be connect to the amplifier or TV.
3.Uses 24 bit/96KHz audio DSP and 24bit/192KHz DAC.
4.Supports for multiple EQ model.
5.Supports digital audio formats:Dolby digital(AC3),DTS,LPCM.
6.Supports multimedia playback of USB disk,can play music,video,photo and text files.
7.The USB port can provide charging for mobile devices.
8.Automatic identification input digial audio signal format,automatic track test.
9.Supports stereo and 5.1 channel two output modes,can be flexible with speaker.

10.High tone quality,low noise.

11.One button to switch mode,simple to operate.
12.Supports for remote operation,visual menu interface.
13.Power-off memory.
14.DC5V/1A power adapter.

Package Contents

1. Main unit x1
2. Remote controller x1
3. AC power adapter x1
4. User manual x1

Specifications

Digital audio decode format...... .............................Dolby Digital (AC3)/DTS/LPCM
USB playback msuic format.............................................................MP3/WMA/AAC/WAV
USB playback video format...........................................Divx3.11,4.x,5.x/Xvid/AVI/MJPEG/VOB/VCD(Dat)MPG1,2,4
USB playback photo format...........................JPG(Resolution range:16x16~10000x10000)
DSP sample frequency range..........................................................................32~96KHz
DSP Bit rate range............................................................................................16~24Bit
Digital input level......................................................................................0.1~1Volts p-p
Analog output level(1KHz@0dB) .......................................................................1V RMS
SNR @ 0dB(CCIR/ARM)...................................................................................... 85dB
Distortion........................................................................................................... 0.1%
Frequency response...................................................................................20Hz~20KHz
Max working current.............................................................................................400mA
Power adapter format Input........................................AC100V~240V 50Hz/60Hz,DC5V/1A
Operating Temperature range........................................................................-10 to +55℃
Storage Temperature range...........................................................................-20 to +60℃
Operating Humidity range................................................10 to 90% RH(No Condensation)
Storage Humidity range.....................................................5to 95% RH(No Condensation)
Case Dimension(L x W x H)...................................................................139x70.5x22(mm)
Weight...................................................................................................................220g

Features of The Interface

OPTICAL IN: Optical/Toslink input
 : USB2.0 Host interface
IR: Infrared receive window
LED: Input port indicator
SOURCE: Input signal source selection
  : Power on/standby

VIDEO: Video output                                                   FL/FR: Front L/R analog output
SL/SR: Surround L/R analog output                       CEN: Center analog output
SW: Subwoof analog output                                     COAXIAL: SPDIF/Coaxial input
DC/5V: 5V DC in jack

Note:

1. You can use “MENU” key to select playlist file types,e.g. music,video,photo,text.
2.In the system settings,you can set the OSD language,stereo/5.1CH output mode,TV display type,power resume,slide mode        and time etc.
3.“SETUP” key can only be used under USB stop.
4.EQ mode includes STANDARD,CLASSIC,JAZZ,ROCK,POPS,BALLAD,DANCE.
5.Repeat mode includes One,FOLDER,DISC,Off four types.

Product

Operating and Connecting

1. Connect one optical fiber/Coaxial cable from digital audio signal source into input port of decoder.
2. Connect six AV cables from TV/analog power amplifier into the analog audio output ports of decoder,the channel must

     correspond.
3. Connect one AV cable from TV into the video output port of decoder.
4. Connect 5V power supply to the decoder and inserted into the power socket.
5. Insert the USB disc,input signal source switch in the USB state,the system will automatically play music files.Press the                 “SOURCE”key or remote controller “INPUT”key to select fiber/coaxial input signal source.
6. Use the remote control to USB control and detailed system menu settings.