Cheap Manual Digtal control cap/hat printing sublimation machine heat press machine factory price

The cap heat transfer machine is portable and smart. It will leave a perfect and clear picture on the caps. Spiral pressure design allows random pressure adjustment while working. A special fixing device allows the cap to be repaired and ensures the accuracy of the printer.

Specifications

Voltage: 110v/220v;                           

Power:380w                                                           

Plate Size:8.5*15cm                                       

Packing Dimension:  60*44*33cm                    

Time:0--399s;                                               

Temperature Range:0--999°C;                  

Weight:24kgs    

Features:

1.Humanized design,convenient to adjust the pressure,achieve to the efficient and accurate hot stamping;
2.Fully digital temperature control,Automatic digital timer,high accuracy.
3.The appearance is fashionable, and small, and easy to carry;

4.Timing automatically when press down.

Opearation
1, Place a shaped hat, close the handle with appropriate pressure and then plug the power;
Caution! The machine must to be protective earthing properly before operating.
Avoid excessive pressure.
2, Cut the picture size to be large as the hat surface and then put it to the hat by adhesive tape.
3, Setting the temperature to an appropriate (between 150°C- 180°C) by turning the temperature knob;
4, Setting appropriate time, approximate 20 seconds, the temperature rising time is 2 to 4 minutes;
5, Place the picture-wraged hat, close the handle and then turn on the power, red indicator lighting;
Caution! The size of picture should be large enough to cover the whole hat surface to avoid singe and impress.
6, The machine shall start the timer automatically and enter the status of constant temperature when the temperature rises to the setting degree;
7, Release the handle when the buzzer rings and take out the hat;
Get rid of the picture paper 3 seconds after the hat to be took out from the machine.
Caution! For protecting the heating mat, place the shaped hat all the time and close the handle when the machine is not being used.
Another piece of paper should be used to cover the hat surface to avoid the direct touch of the hat surface with the heating mat, when the picture is too small to cover the whole hat surface.

Adjustion
Pressure: To adjust the handle to increase or reduce the pressure.
Time: To set the timer to the appropriate time, around 30 seconds.
Temperature: Turn the temperature knob to set the appropriate temperature, between 150°C- 180°C
Caution: The machine needs 2 minutes break every 60 minutes working period when in mass production.
•Problems shooting
Color too light: The baking time is not enough, so add more baking time which will get the real color.
Blurred image: The baking time is too long, just reduce the baking time will make the image distinct.
Partly color light: Caused by the short pressure or the coating is uneven, need to increase the pressure or replace hat with uneven coating.
Blurred image caused by heating mat: replace the heating mat.
Scar on image: The baking time is much too long, just reduce the baking time largely to remove