nurse call system

Specifications

KB818 Nurse Call system Brief Introduction

Nurse Machine:

The Nurse Machine can connect 64 units user machines, It can be installed on wall or put on the table of nurse station.

Music set, open voice functions on touchable function buttons or on its connected telephone keyboard. 3 music could be chosen.

Using standard RJ145 and RJ11 crystal plugs, easy to install and operate.

Size and weight: 235*158*12 mm, 0.55kgs

Intercom User Machine KBC-85

Patient Station on two way speaking mode, clear sound, no noise.

Call button and microphone included on hand station

The user machine could be installed on wall or bed head unit of patient side.

It can be set as Normal call, Special Care Call, Emergency Call. The standard set is Normal Call.

The Priority of three level calls is:

Emergency > Special Care > Normal

Emergency Call Button

Emergency Call button, installed in bathroom/toilet room.

Can be set as three level calls, the standard of call is Emergency Call button.

Lighting signal call condition

(Old type)

The Pull cord is for optional, the standard configuration is without Pull cord. And if with the pull cord, only can calling by pull the pull cord, and the button is only for reset.

(New type)

New type is waterproof and include call button and reset button. You could pull the cord or press call button to call, 2ways both are ok.

Both could be setted on standard 86 power box, on wall or on bed head unit.

Door lamp KBL-10

Door Lamp LED technology, installed outside of ward.

Low energy technology

Keep Flashing when there is calling happen

User display panel KBP-Single side:

With big LED digits, could be putted front of nurse station to display the calling ID same as nurse station.

With beeper sound when calling comes.

Additional Clock Function can be shown.

Corridor Display Panel KBP- double sides:

Installed on corridor.

Display enabled with nurse machine

ID of Bed shown on display screen

Additional Clock Function can be shown

Patient Information Card Machine KBP- User Panel

It can put card with patient information, standard configuration is 64 beds

Connected with nurse machine

When there is calling happen, corresponding indicator light will turn on on the Patient Information Card Machine.

When the light is RED, it stands for “Emergency”, GREEN is Special Care, YELLOW is Normal.

Information Collector Machine KBSC- 818

It will be used when required Computer Management

Having RS232 and USB ports, DV12 power supply

One signal collector can maximum control 17 master machines

Management Software KBSC-818

Software for computer management

Having functions of querying, statistic, printing etc

Remark: We do not provide the computer.