Gathering oil tank cold rotate HY-WKD Diesel Pump Test Bench(same as EPS711)

wood package(fumigate)

Specifications

HY-WKD Diesel Fuel Injection Pump Test Bench(same as EPS711)

Advantage:

1.The fuel temperature and air pressure aer displayed with 3-digit

2.Manual changing rotate speed and rotate speed are ten-archive presetting.

3.0 to 0.25 MPa air source output , air pump is built-in.

4.12V/24V power supply

5.Main motor has the structure of cubic steel frame and the whole structure is compact and stable.

6.The motor shell is spraied with static , which is beatiful.

7.Gathering oil tank cold rotate towards the left or towards the right,it can also be adjusted up to down.

 8.Having emergency stop button .

9.Having the protection functions of over voltage .low voltage over heat and over load etc.

Test bench Features:

1. Changing frequency changing rotation speed;
2. Small fall of rotation speed and high output torque;
3. High measurement precision, Ultra low noise;
4. Over voltage, Overload and short circuit protection;
5. Ten kinds of rotation speeds presetting;
6. Constant temperature controlled;
7. Rotation speed, count, advance angle and temperature are displayed in digits mode, and air pressure is displayed on the mechanical gauge;
8. Built-in Air resource;
9. Can be operated from both sides.

Functions:

1. Measurement of each cylinder's delivery at various rotation speeds
2. Checking each cylinder's injection starting position and delivery interval angle
3. Checking and adjust the mechanical speed governor.
4. Checking and adjusting the distributor pump.
5. Checking and adjusting behavior of supercharging and compensatory device.
6. Measurement of the reflux delivery of distributor pumps
7. Checking the electromagnetic valve of distributor pumps. (12V/24V)
8. Measurement of the distributor pump's body internal pressure.
9. Checking the sealing of fuel injection pump body
10. Install tube of auto-sucking oil supply can check on oil supply pump. (including VE pump.)

11. Measurement of advance angle

Parameter:

1. Adjustable rotation speed range: 0~4000 RPM
2. Test cylinders: 12.
3. Rotation speed presetting: 10 kinds.
4. Test Bench DC. Supply: 12/24V
5. Test Bench Feeding pump motor: 1.1kw
6. Series of graduate glass: 45cc, 150cc. The 260cc is optional
7. Volume of oil tank: 60L
8. Main shafts Center height: 125mm
9. Flywheel inertia's moment: 0.8kg.M2,
10. Stoke counting: 50-9999