Metal Shell Fingerprint Reader with IR Remote Control, Biometric Fingerprint Reader

Specifications

1. Introduction

F007 use the precise electron circuit and good productive technology, which is the metal structure fingerprint & access machine.It is widely used in business affairs organization, office, factory, housing district etc.

This product’s programming is done by the infrared remote control keypad or fingerprint manager. This product maximum can store 120 fingerprints. There are 2 fingerprint managers, and each fingerprint has one ID code.

2. Specifications

Metal shell, anti-vandal.120 fingerprints
Remote infrared programmer
Lock release relay, NO and NC, 12 Volt DC SysteM
Fireproof, Shockproof  Programmable lock release time
Sleep mode to save energy, built in PIR to wake up the device from sleep mod
Three color LED indicator Working temperature: -20°C-55°C
One second activation time, after placing finger on reader
Compact Size: 110mm*70m*30mm.N/W:500g, G/W:800G

Sleeping function

When this machine in stay status, it will auto enter sleep status. This can reduce power dissipation and prolong the machine’suse life.

Managerinfrared remote control keypad

Users use infrared remote control keypad, when enter the programming mode they can operate as follow:

Changing manager code,Add fingerprints,Delete fingerprints,Delete all fingerprints,release alarm,

Setting open door time,Setting release alarm

Manager fingerprint operation function

ID number 1: Manager add fingerprint (can’t open door, number 1 is used add users; number2 is used deleted users)

ID number 2: Manager delete fingerprint

ID number 3~120: users fingerprint

User fingerprint operation function

ID number 3~120: users fingerprint are used open door.

Open door button operation function

This button is used to open the door.

Parma setting function

Open door time: 0~10s, default setting 5s. User can use infrared remote control keypad setting.

Relay out

NC and COM: When power off , the lock is opened.

N0 and COM: When power on,the lock is opened.

Manager release alarm

When this machine is in stay status if it was opened, the buzzer will sound consecutive long ring. And it

will be kept for 1 minute.

Important information

If holes are to be drilled before mounting onto a wall, check for hidden cables and/or pipes before drilling. Use safety goggles when drilling or hammering in cable clips.

Every effort has been made to provide accurate information, however slight variations can occur. We also reserve the right to make changed for product improvement at any time.