Waterproof RFID Access Control Card Reader, Single access Control Confirm to IP68

Specifications

  Waterproof ID EM  Access Control Reader, Single access Control Confirm to IP68

The GAR-3008B uses the latest microprocessor technology to operate door strikes and security systems that require a momentary (timed) or latching dry contact closure.

All programming is done through the keypad. Codes and operating parameters are stored within the microprocessor and can not be lost due to power failure.

Features:

1, Low power consumption: standby current be less than 30mA

2, Luminous Keyboard: Can be operating the machine during night.

3, Large User capacity: support for 2,000 users.

4, Independent password: Can use the password independently to open the doo.

5, User Change Password: Users himself can modify the password to open the door.

6, Fast Search speed: From the credit card to open the door in less than 0.1S.

7, Output short circuit protection: when the electric lock or alarm’s output short circuit

Within 100μS, will automatically turns off output

8, Wiegand output: Wiegand interface, support Wg26, Wg34

9, Keyboard can delete the card number directly: if some card is lost, the keyboard can be used to remove the lost card, total elimination of security risks.

10, Tamper alarm: There will be special built-in buzzer alarm sounds when Illegal disassemble issued

11, Support doorbell button and interface: buttons and circuit isolation, you can add any bell.

Specifications

DC Supply Voltage:DC12V±10%

Current Consumption:≤30mA

Induction Distance:1~5cm

User Capacity:2000 users

Operating Temperature:-10°C~50°C

Operating Humidity:10%~90%

Lock Output Load:≤3A

Alarm Output Load:≤3A

Output short circuit protection time:≤100μS

Adjustable Door open time:0~10s(adjustable)

Dimensions:120 *80*25mm