HY-CRI200B-1High pressure common rail injector test bench

wood package

Specifications

Introduction
HY-CRI200B-I high pressure common rail test bench is a kind of particular equipment newly independent researched and developed to test common rail injector and common rail pump. It is controlled by industrial computer and windows XP. Fuel system is tested by sensors and displayed on LED screen so that data can be checked, stored, modified and generated into database which can be upgraded. Rail pressure is adjustable by using BOSCH CP3.3 high pressure injection pump with 0-2000bar. It can test common rail pump and injector produced by BOSCH, DELPHI, DENSO, and SIEMENS. Its performance is stable with high accuracy and easy to operate and maintain.

Function and characteristics
1. Variable frequency drive pump serves the common rail BOSCH CP3.3 and the maximum pressure is 200Mpa. Automatically closed-loop control, common rail pressure accuracy displayed is± 0.1Mpa.
2. Adjustable in injecting frequency and time.
3. Built-in standard database of common rail injection pump, data can be update and added freely by users.
4. The standard database contains the waveform control data of all types of injection pump, and it can output the standard waveform control signal to the injection pump.
5. It can test BOSCH, DENSO, DEPHI and SIEMNES.
6. Industrial computer motherboard and embedded operating system window XP.
7. Operating by computer mouse and keyboard, easy to learn and use.
8. Oil injection and oil return are automatically detected and clearly displayed on the large screen.
9. Oil temperature is controlled by forced cooling system.
10. Adjustable pulse width and frequency of driving signal.
11. Precise measurement, easy to operate, low noise.
12. Test data reports can be generated, stored and print.

For Common rail injector 1. It can test BOSCH, DENSO, DEPHI and SIEMNES.
2. Six common rail injectors can be tested at a time.
3. Cleaning of high pressure common rail injector.
4. Checking the sealing of the common rail injector.
5. Checking the condition under full load operation.
6. Checking the condition of idle energy.
7. Checking the condition of pre-injection.
8. Checking of all the possibilities set by users.

For Common rail pump
1. It can test BOSCH, DENSO,DEPHI and SIEMNES.
2. Checking of the double plunger of DENSO HPO PUMP(Choose to install)
3. Checking of the injector seal.
4. Checking of the inner tank pressure.
5. Checking of the electromagnetic valve.
6. Checking of the gear pump.
7. Checking of the injection pump rate of flow.