Pneumatic Double Sided Heat Press Machine Sublimation T Shirt Printing Machine

Pneumatic Double Sided Heat Press Machine Sublimation T Shirt Printing Machine

Summary:

This machine can transfer to print multicolor patterns and characters in the sublimation or solvent type of ink on the fabrics made of cotton, linen, and chemical fiber, etc. It also can perform heat treatments such as flock pyrography and foaming printing process, etc. economical and practicable.This machine work with automatically top-down pressure ensuring no movement of heat applied graphics. It is built with a long lasting pneumatic air cylinder lift system, a stronger air valve for faster clamping, and bushings at hinge points for durability. This all makes this machine more suitable for extra high volume work.

Operational Instructions:

1. Plug in, and open the power supply switch; (the rated voltage of this machine is 110/220V, the maximum input power up to 4500W)
2. Set the operational procedures of temperature and time: (the temperature displayed in this machine is in degree Celsius)

Temperature settings: Press the SET Button and the indicating light of SV window will be on. Press “+”or “-“button to set temperatures. After the completion of setting, press SET and return to the interface;

Time settings: Press ST Button and the indicating light of SV window will be on. Press “+”or “-“button to set time. After the completion of setting, press ST and return to the interface.

Notice:

   1. Choose automatic or manual operation mode;

   2.Open the power supply switch;

   3.Set the temperature controller apparatus;

   4.Set the time controller apparatus;

    If choose the automatic operation, it only needs to slide the air operation of the lower working table, that is, to press down, and when the time is up, it will automatically return.

    If choose the manual operation, place articles in position and slide the lower working table to the middle of heating sheet. Start the manual button to perform the air operation that is pressing down, and when the time is up, it will automatically return.

    If the position is found to be wrong during the process of stamping, press the “Emergent Stop” button to stop stamping. After modification, clockwise rotate the “Emergent Stop” button, and the machine table will automatically return to work.

Air pressure:

if the pressure is not enough or too large, it can adjust the pressure adjustment valve on the gas cylinder. Increase the pressure towards the (+) direction, and decrease the pressure towards the (-) direction (please note whether there is any lubricating oil in the gas cylinder).

Technical Parameter: